If you're ready to put your brand on every van in your fleet, here's how to choose the right contractor in Kingsthorpe and what to ask before you sign anything.
Fleet wrapping means covering your vehicles in printed vinyl film cut and fitted precisely to each panel. The result is a consistent, professional look across every van, truck or car in your operation. Done properly, it puts your logo, colours, contact details and any imagery on the vehicle in a way that holds up to daily use.
The process starts with design. A good contractor will work from your existing brand guidelines or help you develop a layout that works at scale - what looks fine on a business card does not automatically translate well to the side of a Transit. After design comes print, then fitting. Each stage matters equally.
We come to your premises in Kingsthorpe to fit the wraps, so your vehicles do not leave site unnecessarily and your operation keeps moving.
Fleet wrapping is not a small purchase. If you are running three vans, a full wrap job is a meaningful investment. At thirty vans it is a significant one. The contractor you choose will be applying graphics that represent your business every day on the road, so it pays to ask the right questions before you commit.
An in-house design and print operation gives you much tighter control over colour accuracy and turnaround. When a contractor sends files to an external printer, the communication chain gets longer and so does the risk of colour shifts or print errors. Ask directly: who prints your work, and where?
Wrapping one van and wrapping fifteen consistently are different skills. Fleet work requires a system: tracking which vehicle has been done, managing variations between model years of the same van, keeping colour batches consistent across a job that might run over several days. Ask to see examples of fleet work specifically, not just individual show vehicles.
Some wrap shops only work from a fixed unit. If you have to move ten vans across Northampton to a workshop and back, that is real downtime and real cost. We travel to the customer and carry out all fitting at your location - ask any contractor you approach whether they can do the same.
Someone is working on your vehicles. If a panel gets scratched during fitting, or a vehicle is damaged while in their care, you need to know there is insurance in place. Ask any contractor you speak to for confirmation that they are insured. If they are evasive, walk away.
Ask what happens if a panel lifts, a colour is visibly off, or a panel was missed. A contractor with a proper process will explain it clearly. Vague answers here are a warning sign.
Wraps do not last forever, and your brand or fleet composition will change. Ask whether the contractor can remove wraps cleanly when the time comes. Removal done badly can damage paintwork, so it is worth confirming this upfront rather than finding out later.
Before signing off on a fleet wrap project, make sure you have clarity on the following points. These are not bureaucratic formalities - each one has a practical effect on the outcome.
A full wrap on a standard medium-wheelbase van typically costs in the region of £500 to £900 depending on the complexity of the design and the number of vehicles. Partial wraps - covering the rear doors and sides but not the cab or roof, for example - cost less. Lettering-only jobs using cut vinyl rather than printed film are cheaper again.
Fleet discounts are real. If you are bringing five or more vehicles, the per-vehicle cost generally comes down because the design work is done once and the setup is shared across the run. Ask for a per-vehicle breakdown as well as a total so you can compare contractors fairly.
Be wary of quotes that seem significantly below market rate. Thin-gauge film, inconsistent colour batches and rushed fitting all show up quickly in daily use - peeling edges, fading and bubbling are the most common signs of a job done on the cheap.
Not every fleet needs a full wrap. For some businesses, cut vinyl lettering with a logo on the doors and a phone number on the rear is exactly the right level of spend. For others, a full-colour printed wrap that covers the entire vehicle is the right call because the visual impact is significantly greater.
The honest answer is that full wraps give you far more coverage and colour flexibility, while cut vinyl is quicker, more straightforward to remove, and costs less. If your brand uses a simple colour palette and bold typography, cut vinyl can look just as sharp as a printed wrap. If you want photographic imagery, gradients or complex artwork, printed film is the only option.
Talk through both options with any contractor you approach. A good one will tell you which suits your brand rather than defaulting to the more expensive option.
Call us to arrange a site visit. We will look at your vehicles, talk through your brand requirements and give you a clear per-vehicle cost with no vague line items. For fleets based in Kingsthorpe and across Northampton, we come to you - bring us the vehicles or we come to your yard, whichever works.
Also available
We design, print and fit full or partial van wraps in Northampton, working at your premises so your vehicle never needs to leave your site.
See detailsWe wrap commercial vehicles of all types across Northampton, from small vans to large panel vans and specialist bodies.
See detailsA full van wrap transforms your vehicle into a moving billboard across Northampton and beyond.
See detailsPhone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.