Covering Northampton and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Part Wraps in Northampton

A part wrap covers specific panels or sections of your van with printed or coloured vinyl, giving you a branded, professional look at a lower cost than a full wrap. We design and print in-house and come to you in Northampton to carry out the installation.

5.0 from 9 Google reviews Est. 2020 Quoted in writing first Nothing printed until you sign off the proof Fitting arranged at your site

What Is a Part Wrap?

A part wrap applies printed or coloured vinyl film to selected panels or sections of a vehicle rather than covering it entirely. The most common approach is to wrap the rear doors, the lower half of the bodywork or the sides, leaving the cab or roof in the original colour. It is a practical middle ground between a full wrap and simple vinyl lettering, giving you bold branded graphics without the cost of covering every panel.

Part wraps work well for businesses in Northampton that have a strong brand colour scheme or imagery they want to display prominently, but whose budget or operational needs mean a full wrap is not the right fit right now. They are also popular for fleet vehicles where a consistent branded lower half or rear door treatment ties the look together across multiple vans.

What Can a Part Wrap Cover?

The term part wrap covers a wide range of configurations. Some of the most common include:

  • Rear door wraps, covering both rear doors with a large graphic or colour block.
  • Lower body wraps, applying a coloured or printed band from the wheel arch line down to the sill.
  • Side panel wraps, covering one or both sides from front to rear without touching the cab doors.
  • Bonnet wraps, applying a colour or design to the bonnet panel only.
  • Roof wraps, used less often on working vans but effective for vehicles that spend time in car parks or are viewed from above.
  • Combination wraps, mixing two or three of the above panels to create a bespoke look.

There is no single template for a part wrap. We design to fit your vehicle and your brand, so the panels chosen and the artwork applied depend on what you are trying to achieve.

How Does the Design Process Work?

Because we design and print in-house, the entire process runs under one roof rather than being split between a graphic designer and a separate print house. That means changes at the design stage are straightforward and do not involve chasing multiple suppliers.

We start by getting the details of your vehicle - make, model, year and body type - because panel dimensions and shapes vary significantly between manufacturers and even between the same model in different years. We then produce artwork on a template matched to your exact van so the design looks right on the actual panels, not just in a flat layout.

If you already have brand assets such as a logo, colour codes or existing printed material, send those across and we will build from them. If you are starting from scratch, we can develop a design for you based on your business name, the type of work you do and any preferences you have for colours or style.

What the Installation Involves

We come to you. The installation is carried out at your premises or location in and around Northampton, so there is no need to drop the van off or arrange transport to a workshop. This matters most for businesses that cannot afford to have a van off the road for more than a day.

Panel preparation is as important on a part wrap as on a full wrap. The panels to be wrapped must be clean, degreased and free from wax, polish, loose paint or rust. Film applied to a contaminated surface will lift from the edges within weeks. We carry out the preparation as part of the installation, but if a panel has significant corrosion or flaking paint, we will tell you before film goes on, because no film will adhere properly to a surface in that condition.

A part wrap on two rear doors or one side of a standard van can typically be completed in a single day. Larger configurations covering multiple panels take longer. We will confirm the timeframe when we quote.

Part Wraps Combined With Vinyl Lettering

Many of the best-looking van liveries combine a part wrap with cut vinyl lettering or additional printed elements. For example, a rear door wrap in your brand colour, with the company name and phone number in cut vinyl on the sides, gives a coherent branded look across the whole vehicle without wrapping every panel. We can produce both elements and install them in the same visit.

Mixing techniques is worth thinking about at the design stage. Cut vinyl lettering is cheaper per square metre than printed wrap film and is ideal for simple text and single-colour shapes. Printed wrap film handles photography, gradients and multi-colour logos that cut vinyl cannot replicate. Using each where it performs best keeps costs sensible and the finished result sharp.

How Much Does a Part Wrap Cost?

A part wrap in Northampton typically costs between £300 and £900 for a standard panel van, depending on how many panels are covered and whether the artwork is a simple colour block or a complex printed design. Rear door wraps for a standard van tend to fall in the £300 to £500 range. A larger side and rear combination with custom printed graphics will sit higher. We will give you a fixed breakdown when we quote, based on your vehicle and the panels you want to cover.

Wrap Removal

If you need an existing part wrap removed - whether because it is ageing, the brand has changed or the vehicle is going back on lease - we can remove it. Removal of a well-applied film from paintwork in reasonable condition leaves the paint beneath intact. We offer removal as a standalone service or as part of a re-wrap.

Is a Part Wrap Right for Your Van?

A part wrap makes most sense when:

  • You want a professional branded appearance without the outlay of a full wrap.
  • The van is leased and you want to limit the area of film to make future removal simpler.
  • The van's existing colour works with your brand, so only certain panels need covering.
  • You are wrapping multiple vans and want to spread the cost by doing the most visible panels first.
  • You want a bold design on specific surfaces - rear doors seen when parked on a street, for example - rather than all-over coverage.

A common mistake with part wraps is treating them as a budget full wrap and simply cutting the design off mid-panel to save material. That rarely looks intentional. The strongest part wraps are designed from the outset to work within their panels, with clean edge lines that follow natural body creases and curves rather than cutting arbitrarily across a flat surface.

Choosing an Installer in Northampton

When choosing an installer, check that they are insured and ask whether they will come to your location or require you to visit a fixed workshop. We cover Northampton and the surrounding area. All design and printing is done in-house, keeping the process straightforward and the turnaround time under control.

Get a Quote for a Part Wrap in Northampton

Tell us your vehicle make and model, which panels you have in mind and what your brand looks like, and we will put a quote together. Call us to start the conversation or send across your details and we will come back to you with a price and a design proposal.

Included with every job

  • A design on your own vehicle model for you to approve.
  • The full cost set out in writing before work starts.
  • Graphics printed in-house.
  • Fitting at your premises, booked for when the vehicle is free.
  • Your design kept on record so later vehicles match.

Questions

Part Wraps - common questions

How much does a van wrap cost in Northampton?
A full van wrap in Northampton typically costs between £1,500 and £3,000, depending on the size of the vehicle, design complexity and how much of the van is being covered. Partial wraps and spot graphics are priced lower. The best way to get an accurate figure is to call us with the details of your vehicle and what you need.
What should I budget for wrapping a commercial vehicle in Northampton?
A full wrap on a commercial vehicle in Northampton typically costs between £1,500 and £4,000. Smaller vans sit at the lower end, while larger vehicles such as Luton box vans, curtainsiders or high-roof panel vans sit higher due to the greater surface area and fitting time involved. Partial wraps and individual graphics cost less. Contact us with your vehicle details for an accurate quote.
Is it expensive to wrap a whole fleet of vans in Northampton?
Fleet wrapping is priced per vehicle, and the per-vehicle cost can reduce slightly for larger fleets because the design work is shared across more units. A full wrap on a standard panel van typically costs between £1,500 and £3,000, with larger vehicles priced higher. The most practical way to get a realistic total is to tell us how many vehicles you have, what types they are, and what coverage you need.
What should I budget for a full van wrap in Northampton?
A full van wrap in Northampton typically costs between £1,500 and £3,000 for a standard panel van, depending on the vehicle size, the finish chosen and the complexity of the printed design. A simple colour change wrap sits towards the lower end of that range, while a full advertising wrap with custom photography or complex artwork sits higher. We will give you a clear quote once we know the vehicle and what you need.
What am I likely to pay for a part wrap on a van in Northampton?
A part wrap on a standard panel van in Northampton typically costs between £300 and £900, depending on the number of panels covered and the complexity of the printed artwork. A rear door wrap alone usually falls between £300 and £500. A larger side and rear combination with custom graphics sits towards the top of that range. We will give you a clear quote based on your specific vehicle and panels before any work begins.
How is van signwriting priced in Northampton?
Van signwriting is priced based on the number of panels to be lettered, the amount of text and whether the job involves simple cut vinyl or full-colour printed graphics. A straightforward text-and-phone-number job on the sides and rear of a standard panel van typically costs between £150 and £400. Adding a printed colour logo panel or additional graphics moves the price towards £600. We will give you a clear quote once we know your van and what you want on it.
How much does van graphics cost in Northampton?
Simple cut vinyl lettering on both sides of a van typically starts from around £150. Fully printed partial wraps with designed artwork usually fall in the £400-£700 range, depending on coverage and vehicle size. We provide a clear price before any work begins.
What am I likely to pay for vehicle graphics in Northampton?
Cut vinyl lettering on a car or small van typically starts from around £100-£200. Printed partial wraps on a medium van usually fall between £350 and £700 depending on the coverage and design complexity. Full wraps on larger vehicles are priced individually. We always give you a clear price before any work starts.

Part Wraps in Northampton?

Tell us the make, model and number of vehicles by phone or through the form, and we will put a price in writing.

Call Quote