Choosing the right materials for your fleet wrap in Wellingborough is one of the most important decisions you'll make - and it's worth understanding what's actually available before you commit.
When a fleet manager rings about wrapping their vehicles, the conversation usually starts with design and price. Materials tend to come up later, if at all. That's understandable - the visual result is what you see every day. But the material your wrap is printed on and applied with determines how long that result lasts, how well it handles the conditions your vehicles work in, and how cleanly it comes off when the time comes.
Getting this wrong costs money twice: once when you pay for a wrap that fails early, and again when you pay to have it removed and replaced. So here's a plain guide to what's out there, with honest commentary on each option.
All vehicle wrap vinyl is produced by one of two manufacturing methods: cast or calendered. These aren't brand names - they describe how the film is made.
Calendered film is produced by pressing heated vinyl compound through rollers. It's thicker, less flexible and retains more internal stress from the manufacturing process. That internal stress means that over time - and especially in heat - calendered film tries to return to its original flat shape. On a flat panel, this matters less. On a curved surface, it causes lifting at the edges and eventual peeling. Calendered film is less expensive, which makes it appropriate for flat-panel applications, short-term graphics, or indoor use. It's not the right choice for a vehicle that works outdoors year-round.
Cast film is made by pouring liquid vinyl onto a casting sheet and allowing it to cure. Because it's not mechanically stressed during manufacture, it conforms much more easily to compound curves and recesses without lifting. It's thinner, more pliable and more stable over time. Cast film is the standard choice for full vehicle wraps on working vans and commercial vehicles. It costs more than calendered film, and that cost difference is real and justified.
A common problem in the industry is suppliers quoting on calendered film and not making that clear upfront. If a wrap price looks significantly cheaper than others you've received, ask what film grade is being used. The savings at the start often don't survive contact with the real world.
Cast film is available in a range of finishes. The three you'll encounter most often are gloss, satin and matt.
These are two distinct approaches to vehicle branding, and the right choice depends on your design and your budget.
Cut vinyl graphics are shapes and lettering cut from solid-colour vinyl sheet using a plotter. Because the colour is in the material itself rather than printed on it, it doesn't fade in the same way as printed ink. Cut vinyl is well suited to simple text, logos with clean geometric shapes, and applications where you need longevity and low cost. The limitation is that you're restricted to solid colours - no gradients, no photographs, no complex illustrations.
Digitally printed wraps allow full-colour designs: photography, gradients, complex graphics, backgrounds. The print is applied to cast film using UV-stable inks, which resist fading significantly better than older solvent-based processes. Because every vehicle in a fleet can be printed from the same file with the same colour profile, the colour stays consistent whether it's three vans or thirty.
A hybrid approach - printed panels combined with cut vinyl elements for text and phone numbers - can offer a good balance of visual impact and longevity for the highest-wear elements.
A printed wrap can be finished with a clear laminate film applied over the top. This protects the printed ink layer from abrasion, cleaning chemicals and UV exposure. For working vehicles that go through commercial wash facilities or rack up high mileage, lamination is worth including. It adds cost but it extends the working life of the printed graphics and makes the surface more resistant to the kind of minor contact damage that happens on a busy work site.
Unlaminated printed wraps are sometimes used for shorter-term applications or display vehicles that don't see heavy use. For a working fleet, lamination is the more practical choice.
You don't have to cover every panel to achieve a professional branded result. The options broadly are:
Cast film applied correctly should remove cleanly when the time comes. The main risk during removal is on vehicles where the paintwork is compromised - either through age, previous repairs or poor-quality paint applied before the wrap went on. It's worth knowing the condition of your vehicles' paintwork before you start, because a wrap can mask underlying problems that only become apparent at removal stage.
If you're leasing your vehicles, check your lease agreement. Most leasing companies accept wrapped vehicles but expect them to be returned in original condition, which means removal is part of your end-of-contract process.
We're based in Northampton. If you're weighing up materials and options for your fleet, call us and we'll talk through what genuinely suits your vehicles, your brand and your budget - not just what's easiest for us to quote.
Also available
We design, print and fit full or partial van wraps in Northampton, working at your premises so your vehicle never needs to leave your site.
See detailsWe wrap commercial vehicles of all types across Northampton, from small vans to large panel vans and specialist bodies.
See detailsA full van wrap transforms your vehicle into a moving billboard across Northampton and beyond.
See detailsPhone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.