Covering Northampton and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Van Graphics in Wolverton

Van Wrapping Northampton fits van graphics for tradespeople and small fleets in Wolverton, with in-house design and print and all work done at your location.

5.0 from 9 Google reviews Est. 2020 Quoted in writing first Nothing printed until you sign off the proof Fitting arranged at your site

What Van Graphics Involve

Van graphics is a broad term that covers everything from a set of cut vinyl letters on two doors to a full printed livery wrapping every panel of a large van. The service sits between basic magnetic signs - which are temporary and removable - and a full colour-change vinyl wrap, which covers the entire vehicle. Most businesses end up somewhere in between, with a combination of printed panels, solid colour blocks and cut lettering that gives strong visual impact without the cost of a full wrap.

The Main Materials Used in Van Graphics

Understanding the material options helps you make a better decision and ask better questions of any supplier. Van graphics are almost always made from self-adhesive vinyl film, but that covers a wide range of products with significantly different properties.

The two main categories are cast vinyl and calendered vinyl. Cast vinyl is made by pouring liquid PVC compound onto a casting sheet, which produces a thinner, more stable and more conformable film. Calendered vinyl is made by passing PVC through rollers under pressure, which produces a slightly thicker, less flexible material. Both have genuine uses in van graphics - the difference matters most when you are applying to complex curves.

Cast Vinyl: Pros and Cons

Cast vinyl is the material of choice for a vehicle that needs to look good for several years on complex panel shapes. Because it is thinner and more stable, it conforms to body creases, door handles and curved panels without lifting at the edges or developing stress points. It also has better dimensional stability, meaning it shrinks less over time as it is exposed to heat and cold.

  • Conforms well to curves and recessed areas
  • Longer usable lifespan on a working vehicle
  • Thinner profile makes overlaps and joins less visible
  • Easier to remove cleanly at end of life without leaving adhesive residue
  • Higher cost per square metre than calendered material

For a full livery on a Transit or Sprinter-sized van that is out on the road daily, cast vinyl is usually the right specification. The higher material cost is offset by not needing to replace graphics as early.

Calendered Vinyl: Pros and Cons

Calendered vinyl is not an inferior product - it is simply better suited to certain applications. For flat or gently curved surfaces, it performs well and costs less. It is commonly used for simple lettering on flat doors, for interior graphics, and for short-term promotional graphics where longevity is not the priority.

  • Lower cost per square metre
  • Suitable for flat and low-curve panels
  • Adequate for applications not expected to last more than a few years
  • Can lift more readily on complex curves and sharp body lines
  • Thicker profile can make joins more visible on large printed panels
  • More prone to shrinkage over time, which can open up seams

A supplier who specifies calendered material for a full side graphic on a modern van with pronounced wheel arch flares and body contours is likely cutting costs at your expense. It is a reasonable question to ask upfront.

Printed Graphics vs Cut Vinyl: Which Should You Choose?

Cut vinyl lettering is produced by a plotter cutter that cuts the shape directly from a solid-colour vinyl sheet. It is clean, durable and effective for text, logos with solid colours and simple shapes. It does not allow for photographic images, gradients or complex multi-colour designs without layering, which adds to cost and reduces longevity at the overlap points.

Digitally printed graphics are printed onto a vinyl sheet (usually with a protective overlaminate on top) and then applied as a panel or contour-cut shape. Printed graphics allow full photographic quality, gradients, fine detail and any colour combination. The overlaminate protects the print from abrasion and UV exposure.

Many liveries use both: cut vinyl for the main contact details and tag lines, printed panels for imagery, brand colours or complex logo artwork. The combination often gives the best balance of cost and visual impact.

Overlaminates and Why They Matter

A printed graphic without an overlaminate will fade and scratch relatively quickly on a working van. The overlaminate is a clear protective film applied on top of the print, available in gloss or matt finishes. Gloss gives vivid colour and is the default choice for most liveries. Matt overlaminates are increasingly popular because they give a more considered, premium appearance - and they do not show water spots and hand marks as readily, which matters if the van is not washed every week.

Some overlaminates also offer a degree of texture, including a satin finish that sits between gloss and matt. The finish choice is worth discussing at the design stage because it affects how colours read on the vehicle, particularly dark colours which can look slightly different under a gloss versus matt laminate.

Full Livery vs Partial Graphics

A full livery covers both sides, the rear doors and usually the cab doors in a unified design. It delivers maximum brand presence and - because the graphics cover a large proportion of the van's surface - offers some incidental protection to the paintwork beneath from minor stonechips and surface scratches.

Partial graphics typically cover the lower half of the sides, specific panels or the rear only. They cost less and can be just as effective for brand recognition if the design is bold and the contact details are clear. For a sole trader or a two-van business, partial graphics often represent the most practical spend.

Fleet managers running several vans should consider the template approach: a master design that can be scaled and adjusted for different van sizes and body types within the same fleet. We design for this from the outset, which avoids the common problem of a livery that looks right on a Transit but disproportionate on a smaller Connect or a longer Crafter.

What Van Graphics Cost

Cut vinyl lettering on two sides of a standard panel van typically falls in the range of £150-£300 depending on the quantity of text and any logo complexity. A printed side panel graphic on both sides of a Transit-sized van generally runs from £400-£800. A full printed livery including sides, rear and cab on a large panel van can reach £1,200-£2,000 or above, depending on design complexity and total coverage.

These are realistic UK market figures. The actual cost for your van depends on its size, the design, the material specified and the total area covered. We quote per job after a conversation about what you want to achieve.

We Come to You in Wolverton

All our work is done at the customer's location. If your van is based in Wolverton or nearby, we come to you - at your yard, your home or wherever the vehicle is kept - so there is no disruption to your working day beyond the time the fit takes. If your van has old livery, ask whether it can be stripped cleanly before new graphics go on.

Call us to talk through the options for your van. We can advise on material, finish and design approach before you spend anything, and we will give you a straight price for the work.

Why use us in Wolverton

  • Your design shown on your vehicle before printing.
  • Graphics designed and printed by us.
  • We fit at your premises in Wolverton.
  • We are insured.

Van Graphics in Wolverton?

Phone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.

Call Quote