Van wrapping is a real business investment, and for businesses in Daventry it pays to understand exactly what you are paying for and what will push the price up or bring it down.
Van wrap prices in the UK vary considerably depending on what is being done and who is doing it. For a rough guide, a full printed wrap on a medium panel van (Transit Custom or equivalent) typically falls in the range of £1,500 to £2,500 for a professional install with an in-house printed design. A full colour-change wrap using solid cast film without print work usually comes in lower, often in the range of £1,000 to £1,800 for the same size vehicle.
Partial wraps, covering the rear doors and lower side panels with graphics on a plain background, can start from around £400 to £800 depending on the complexity of the design and the number of panels involved. Cut vinyl lettering only, applied to the sides and rear without any background film, sits at the lower end, typically £150 to £450 depending on how much is on each panel.
These are working figures for the current market. The final price for your vehicle will depend on the factors below.
Van size is the most straightforward cost driver. More surface area means more film, more print material and more installation time. The common size categories and what they typically mean for pricing are:
If you have a fleet of different vehicle sizes, pricing will vary per vehicle even if the design is the same across all of them.
A full wrap covers all external panels: both sides, the rear, the bonnet, the roof (if specified), bumpers, mirrors and door edges. A partial wrap covers a defined portion, commonly the lower two-thirds of the sides and the rear doors, leaving the original vehicle colour visible on the upper body. Partial wraps use less film and take less installation time, so they cost less.
The practical question is what your vehicle already looks like. If your van is white, a partial wrap that leaves the upper panels white can look entirely deliberate and clean. If your van is red and you want a blue design, a partial wrap will show the red on the uncovered areas and the result will not read as a coherent livery. Partial wraps work best on white or light-coloured vehicles where the remaining bodywork blends with the design.
A simple design with flat brand colours, your business name, number and a logo is quicker to produce and less likely to need revisions than a design with photography, gradients, complex illustrations or multiple colour blends. We design in-house, so design is part of the process rather than a separate cost you need to arrange elsewhere. Even so, a simple, well-structured design and a photographic, multi-layer design are not the same amount of work and the pricing will reflect that.
Print resolution and the number of different panels carrying unique content also affect production cost. A van where the driver's side and passenger side carry slightly different content needs two separate print runs rather than one mirrored layout.
The condition of the paintwork matters. A van with clean, smooth, properly prepared paint is straightforward to wrap. A van with heavy stone chip damage, filler repairs, rust blisters or previous paintwork that is flaking will cause problems. Vinyl film follows the surface it is applied to. If the paint is pitted or lifting, the film will not lie flat, and in areas where the paint is loose the film may pull it further as it stretches into place.
Surface preparation adds time to any job, but it also protects the investment. For vehicles with significant paint issues, it is worth addressing the worst areas before wrapping rather than finding out after installation that large sections of the wrap cannot be made to lie flat.
If you are having more than one vehicle wrapped to the same design, there are real savings in the design and setup process. The design work and template setup is done once and the same files are used for every vehicle. Print and film costs scale with area, but the per-vehicle overhead comes down with volume. If you manage a small fleet in or around Daventry and have been putting off getting vehicles wrapped because the per-unit cost seemed high, ask specifically about multi-vehicle pricing.
If your van already has a wrap and needs it removed before a new one goes on, that is a separate piece of work. We carry out wrap removal, and the cost depends on the age and condition of the existing film. Old film that has started to degrade takes longer to remove cleanly than relatively fresh film. A vehicle being re-wrapped from scratch after a removal will cost more than a virgin vehicle getting its first wrap, so it is worth factoring that in when budgeting.
We come to you. Work is done at your premises or yard in Daventry, and travelling to your location is part of the service. The price you are quoted covers design, print, lamination and installation as a package, not as separate line items you have to add together yourself.
The figures on this page are a guide. The only way to get an accurate price for your specific van and brief is to call us and talk it through. Tell us the make, model and year of the vehicle, what you want on it and how urgently you need it done. Having those details to hand makes it easier to get a clear figure.
Call Van Wrapping Northampton to get a price for van wrapping in Daventry. We design and print in-house and carry out all installation at your location.
Also available
We wrap commercial vehicles of all types across Northampton, from small vans to large panel vans and specialist bodies.
See detailsWe design, print and fit branded wraps across entire vehicle fleets in Northampton, ensuring every vehicle in your fleet looks consistent.
See detailsA full van wrap transforms your vehicle into a moving billboard across Northampton and beyond.
See detailsPhone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.