Van Wrapping Northampton fits vehicle graphics in Wolverton, working at your premises with in-house design, print and application for cars, vans, lorries and fleet vehicles.
Not every vehicle graphics job is the same, and not every material suits every application. The options available today range from simple cut vinyl lettering through to full-colour digitally printed wraps, and each has a different cost, lifespan, appearance and practical use case. If a supplier does not ask about how the vehicle is used, how many miles it covers and where it is kept, they are not specifying materials properly.
We design and print in-house, which means we choose materials to suit the job rather than whatever a third-party printer has in stock. When choosing an installer, ask whether they are insured and whether they will come to you in Wolverton to carry out the work at your premises or at the vehicle's location.
Cut vinyl is exactly what it sounds like: letters, numbers, logos and simple shapes cut from a single-colour vinyl film and applied directly to the vehicle panel. There is no printing involved. The colour runs through the full depth of the material.
It is the most cost-effective option for straightforward text-based signwriting. The limitation is that cut vinyl cannot reproduce photographs, gradients or complex multi-colour designs. If your branding involves a photographic image or a logo with multiple overlapping colours, cut vinyl alone will not achieve it.
Cut vinyl is well suited to:
The honest limitation: cut vinyl in lighter colours on a dark vehicle can look thin without a contrasting outline, and very fine detail in small lettering does not always cut or weed cleanly. A good designer will flag this before cutting rather than after.
Digitally printed graphics are produced on a wide-format printer and then laminated to protect the print. They can reproduce any design, any photograph, any gradient or complex logo accurately. They are applied as panels or sections to specific areas of the vehicle rather than covering the full surface.
A partial wrap might cover the rear doors, the lower half of the bodywork, or a full side panel. It allows a high-impact, full-colour branded look without the cost of a complete wrap. For many tradespeople and small business owners, a partial wrap combined with cut vinyl for contact details on other panels gives the best balance of cost and visual impact.
The practical considerations with printed graphics:
This is a distinction that matters far more than most customers realise, and it is worth understanding before you agree to a price.
Calendered films are produced by passing the material through rollers under pressure. They are less expensive to manufacture and work well on flat or gently curved panels. The material has a memory of its flat original shape, which means on a panel with tight curves or recesses, it will try to pull back over time. This leads to edge lift, particularly around wheel arches, door handles and mirrors.
Cast films are produced by spreading the material in a liquid state and allowing it to cure. The result is a thinner, more flexible film with no shape memory. It conforms to compound curves properly, lies flat in recesses, and is significantly more stable over time. For a full wrap or for graphics that cover heavily contoured panels, cast film is the correct specification.
The price difference between the two materials is real, and a quote using calendered film will come in lower than one using cast film. But on the wrong application, the savings disappear quickly when the film lifts within a year and needs to be removed and redone. Ask any supplier which film type they are specifying and why.
A full wrap covers the entire painted surface of the vehicle in a single continuous film. For branded fleet vehicles, this produces the most consistent, highest-impact result. It also protects the original paintwork underneath, which is relevant if the vehicle is leased or if resale value matters.
Full wraps require more material, more preparation time and more skilled application. The vehicle must be spotlessly clean, all edges must be properly sealed and any difficult areas, door jambs, mirrors, bumpers and recesses, need to be handled carefully. A full wrap done properly is a substantial piece of skilled work. Done poorly, it looks worse than partial graphics and is expensive to redo.
Full wrap pricing for a standard panel van typically ranges from around £1,500 to £3,500 or more depending on the size of the vehicle, the complexity of the design and the film specified. A large crew cab or long-wheelbase van will sit at the higher end of that range. These are general market figures rather than fixed quotes, since every vehicle and design is different.
We also carry out wrap and graphics removal, which is worth knowing whether you are rebranding, changing vehicles or clearing old graphics from a purchased van. Film removal on a vehicle that has been properly wrapped with quality materials is straightforward when done correctly, using heat and the right tools. Removal of old, degraded film or low-quality materials is more time-consuming, particularly if adhesive residue has been baked on through years of sun exposure.
If you are buying a used van with existing graphics that need to come off before rebranding, factor removal into your budget. We can assess the condition of existing graphics and advise on what removal will involve before you commit.
For fleet managers and small business owners running more than one vehicle, consistency matters. A fleet where each vehicle has been branded at a different time by different suppliers, in slightly different colours with varied layouts, looks disorganised, whatever the quality of the individual graphics.
Because we design and print in-house, we can ensure colour and layout consistency across every vehicle in your fleet, whether that is two vans or twenty. When planning a fleet job, ask how the work will be scheduled around your operations, and whether the installer can come to you so that vehicles are off the road for as little time as possible.
Before confirming any vehicle graphics job in Wolverton, it is worth asking:
Call us to discuss your vehicles and what you are looking to achieve. We will come out to Wolverton, take a look and give you a straight quote based on what the job actually involves.
Also available
We design, print and fit full or partial van wraps in Northampton, working at your premises so your vehicle never needs to leave your site.
See detailsWe wrap commercial vehicles of all types across Northampton, from small vans to large panel vans and specialist bodies.
See detailsWe design, print and fit branded wraps across entire vehicle fleets in Northampton, ensuring every vehicle in your fleet looks consistent.
See detailsPhone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.