Choosing the right materials for vehicle graphics in Wellingborough makes the difference between a fresh, professional look that lasts and a job that starts failing within a year.
Most customers asking about vehicle graphics in Wellingborough focus on the design first, and that is fair enough. But the material behind the design determines how long it looks good, how it handles on complex panel shapes, and how cleanly it comes off when you eventually want to change it. Getting the material right is not about spending more money for the sake of it. It is about matching what you buy to the job it has to do.
We design and print in-house, so we are involved in material decisions from the outset. We will tell you plainly what suits your vehicle, your use case and your budget.
All vinyl graphics films start from one of two manufacturing processes, and understanding the difference will help you ask the right questions.
Calendered vinyl is made by pressing the material through rollers. It is generally thicker and stiffer, and it retains some internal stress from the manufacturing process. Over time, particularly in prolonged heat or cold, it tends to shrink slightly. On flat panels this is manageable. On curved panels, door handles, wheel arches or recesses, it can lift at the edges or crack. Calendered film is typically used for shorter-life applications, flat surfaces and situations where budget is the primary driver. It is not the right choice for a full van wrap or for graphics that need to conform to complex body shapes.
Cast vinyl is made by casting liquid material onto a flat surface and allowing it to cure. The resulting film has very little internal stress, is thinner and far more dimensionally stable. It conforms well to compound curves and recessed surfaces, and it resists shrinkage over time. Cast film is the professional standard for full wraps, complex shapes and any installation intended to last several years.
For simple cut lettering on flat van sides, calendered film can do an adequate job at a lower cost. For anything more involved, particularly a full or partial wrap, cast film is the correct choice.
Cut vinyl is the most straightforward form of vehicle graphics. The design is cut from a single colour of vinyl film, the excess material is weeded away, and the remaining text or logo shape is applied to the vehicle surface. There is no printing involved.
Pros:
Cons:
Cut vinyl lettering suits sole traders and small businesses who want a clean, legible name, number and trade on a van without a full design treatment. It is a sensible starting point for a new business that may rebrand as it grows.
Printed graphics are produced on a wide-format digital printer using UV-resistant inks, then protected with an over-laminate layer before application. They allow full-colour designs, photographic images, gradients, complex logos and anything else that cut vinyl cannot achieve.
Pros:
Cons:
Printed graphics suit businesses that have invested in a proper brand identity and want it reproduced accurately on their vehicles. For fleet managers in Wellingborough running multiple vehicles, printed graphics ensure every van, lorry or car looks identical, which cut vinyl alone cannot achieve with complex logos.
A partial wrap covers a defined area of the vehicle, most often the rear, the rear quarter panels, or the lower body. It typically combines printed panels with cut vinyl lettering elsewhere on the vehicle. A full wrap covers the entire exterior surface.
Partial wraps are more cost-effective and can be very striking if the design uses the vehicle's base colour as part of the composition. If your van is white, a partial wrap that leaves the upper body white and applies a strong design to the lower half and rear can look just as professional as a full wrap at a lower cost.
Full wraps are the right choice when the vehicle is not white or silver (colours that work with partial wrap designs), when you want a colour change as well as branding, or when the design calls for coverage across the entire vehicle.
Magnetic signs are sometimes considered by people who want removable branding, particularly sole traders who use a personal vehicle for work and do not want permanent graphics. They are a legitimate option for occasional, low-intensity use.
The practical problems with magnetics are worth knowing before you commit. They can trap water and grit behind them against the paintwork, particularly if they are not removed and the surface beneath cleaned regularly. At motorway speeds they can shift or lift at the edges. They do not conform to curved surfaces or door handles. And they look noticeably less professional than applied graphics when both are compared side by side. For a business vehicle that is out daily and parked in front of customers, applied graphics almost always serve better.
We also carry out wrap removal, which is relevant if you are updating your branding, changing vehicles, or taking over a used van with someone else's graphics on it. Proper removal using heat and appropriate tools leaves the paint in good condition. Poor removal leaves adhesive residue and can damage the paint underneath, particularly on older vehicles. If you need old graphics off before new ones go on, that is something we can handle as part of the process.
For businesses in Wellingborough managing more than one vehicle, consistency matters. When every van, car or lorry in a fleet looks identical, it communicates that the business is organised and professional. When one vehicle has peeling graphics from five years ago and another has a newer design in slightly different colours, the brand message is undermined.
We produce everything in-house, so matching colours, layouts and finishes across a fleet is straightforward. If you are adding a new vehicle to an existing fleet, bring us the reference from your existing graphics and we will match to it.
If you are not sure whether cut vinyl, printed graphics or a partial wrap is the right fit for your vehicle and your business, call us and talk it through. We will ask about the vehicle, the colours, how long you plan to run it, and what you are trying to achieve, and give you a straight answer about what will work and what it will cost.
Also available
We design, print and fit full or partial van wraps in Northampton, working at your premises so your vehicle never needs to leave your site.
See detailsWe wrap commercial vehicles of all types across Northampton, from small vans to large panel vans and specialist bodies.
See detailsWe design, print and fit branded wraps across entire vehicle fleets in Northampton, ensuring every vehicle in your fleet looks consistent.
See detailsPhone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.