Covering Northampton and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Commercial Vehicle Wrapping in Kettering

If your van's livery is peeling, fading or simply no longer doing your business justice, Van Wrapping Northampton serves Kettering with a full design, print and fit service for commercial vehicles of every size.

5.0 from 9 Google reviews Est. 2020 Quoted in writing first Nothing printed until you sign off the proof Fitting arranged at your site

When Does a Commercial Wrap Need Attention?

Most van wraps don't fail overnight. The signs build up gradually, and because you see your vehicles every day it's easy to miss them. Knowing what to look for means you can act before a tired-looking van starts sending the wrong message to customers.

The most visible warning sign is edge lifting. The vinyl film starts to peel away at door seams, panel edges, mirror housings and around rivets on Luton box vans. Once an edge lifts, moisture and road grime work underneath, and the bond weakens quickly from that point. A small lift left untreated can turn into a large peeling section within weeks.

Fading and Colour Shift

Printed wraps are exposed to UV light every day. Over time, colours that started as vivid red or bright white begin to look washed out or take on a yellow-pink tinge. This is more noticeable on vehicles that park outdoors rather than under cover. If your fleet has a mix of older and newer wraps, the colour shift becomes obvious when two vehicles are parked side by side.

Fading is not just an aesthetic problem. For trade businesses where consistent branding matters, a fleet where every van looks a different shade of your company colour undermines the professional image you're paying for. The underlying cause is UV degradation of the print inks, which is why print quality and the grade of film used at the outset make a real difference to how long a wrap holds its colour.

Bubbling and Lifting Across Flat Panels

Small bubbles appearing across a panel, rather than just at edges, usually point to one of two causes: poor surface preparation when the wrap was originally fitted, or a wrap film that wasn't suited to the vehicle's panel temperature range. Vans that work long days absorb a lot of heat through metal panels. If the adhesive wasn't designed for that thermal cycle, it starts to release.

Bubbles can also appear after a pressure wash if the wrap was already starting to fail. High-pressure water forces its way under any weakness and expands it. If you're seeing bubbles after a wash, the wrap is telling you it's near the end of its useful life on that area.

Cracking and Brittleness

Vinyl film has a natural lifespan. As it ages, it loses flexibility and becomes brittle, particularly in areas that flex - around doors, hinges, and body curves. Cracking along a crease or hinge line is a clear sign the film has gone past its best. At this stage, trying to patch the area rarely looks right because new film won't match the colour of aged, UV-exposed film alongside it.

Cracks let water directly onto the paintwork beneath. For leased vehicles that need to be returned in good condition, or vehicles you plan to sell, a cracked wrap left in place can trap moisture and lead to corrosion starting under the film.

Silvering Around Fixings and Rivets

On panel vans with pressed-steel bodies, lifting around door handles and keyholes is common because these are high-contact areas where fingers constantly catch the edge of the wrap. On Luton box vans and larger vehicles, the rivets holding the body panels are a known stress point. The film has to stretch around each rivet head, and over time the bond at that point fails, leaving a small silver halo of lifted film around each fixing. When you see this across a large flat side panel, it's a sign the wrap needs replacing rather than spot-repairing.

What Causes Wraps to Fail Early?

Not all early wrap failures come down to age. Surface preparation is the single biggest factor in wrap longevity. Any contamination - wax, grease, polish residue, or rust spots - left on the bodywork before the film goes down will prevent the adhesive bonding properly. A vehicle that wasn't degreased and cleaned correctly before wrapping will start showing edge lifts and bubbles much sooner than one that was properly prepared.

Panel damage also causes problems. Deep scratches, dents with sharp edges, or rust that was painted over rather than treated will all cause the film to fail at that point. A wrap is not a body repair; it lies over the surface as it finds it, and any irregularity in the substrate shows through or causes a stress point in the film.

The vehicle's working environment matters too. Vehicles driven regularly through car washes with hard brushes, exposed to chemical wash-down at depots, or working in environments with heavy airborne contamination (construction sites, agricultural settings) will wear a wrap faster than a vehicle that simply does road miles.

What to Do if You're Seeing These Signs

If your wrap is showing one or more of these warning signs, the question is usually whether the whole wrap needs replacing or whether a repair or partial re-wrap is worth doing. As a general rule, if the film is old and faded across the whole vehicle, a full replacement gives a consistent result. If the problem is limited to one panel on a wrap that's otherwise in good condition, a panel replacement can work - but bear in mind that matching colour on an aged wrap is never perfect.

We carry out wrap removal as part of our service. Old wrap film is removed cleanly before any new film goes down, so the new wrap starts on a properly prepared surface. We come to your premises or yard in Kettering, so your vehicles don't need to travel and can go back into service as soon as the work is complete.

We design and print everything in-house at our Northampton base, which means we control the quality of the artwork and the print from start to finish. If you're refreshing your branding at the same time as replacing an old wrap, we can work with your existing files or design something new.

Fleet Vehicles: Keep an Eye on the Whole Fleet Together

For businesses running more than one vehicle, it's worth reviewing the whole fleet at the same time rather than replacing wraps one at a time as each one fails. Vehicles wrapped in the same batch, using the same film and print run, will age at a similar rate. Reviewing them together means you can plan the cost as a single project, and all your vehicles will carry consistent branding at the same time.

To talk through the condition of your fleet's current livery and get a clear picture of what's involved, call us and we'll arrange a visit to your Kettering site.

Why use us in Kettering

  • Your design shown on your vehicle before printing.
  • Graphics designed and printed by us.
  • We fit at your premises in Kettering.
  • We are insured.

Commercial Vehicle Wrapping in Kettering?

Phone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.

Call Quote