Covering Northampton and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Fleet Wrapping and Branding in Kettering

If your Kettering fleet is starting to look inconsistent, faded or just plain anonymous, it may be time to look seriously at professional fleet wrapping and branding.

5.0 from 9 Google reviews Est. 2020 Quoted in writing first Nothing printed until you sign off the proof Fitting arranged at your site

When Your Fleet Is Telling You Something

Most business owners don't decide to wrap their fleet on a whim. Something triggers it. A customer comments that two of your vans look completely different from each other. You spot a competitor's vehicle on a roundabout and realise their branding is sharper than yours. Or you notice that the vinyl lettering on one of your older vans is peeling at the corners and bubbling along the top edge. These are all signs that your fleet's visual presence is working against you, not for you.

Fleet wrapping isn't just about aesthetics. Your vehicles are the most visible part of your business every single day. If they look inconsistent or tired, that's the impression left with every driver, pedestrian and potential customer who sees them on the road around Kettering and beyond.

Warning Signs Your Fleet Needs Attention

It helps to know what to look for so you can make an informed decision rather than wait until things get worse. Here are the most common signs that a fleet wrap or rebrand is overdue.

  • Peeling edges: Vinyl graphics that weren't applied correctly, or that have aged past their useful life, start lifting at the edges first. Door edges, panel seams and around door handles are typical weak points. Once an edge lifts, water and dirt get underneath and the problem spreads faster than you'd expect.
  • Fading and colour shift: Printed graphics fade over time, especially on vehicles that sit outside year-round. White lettering often goes slightly yellow. Dark colours lose their depth. If your fleet has vehicles of different ages, the colour mismatch between them becomes noticeable even from a distance.
  • Cracking and crazing: Older cast or calendered vinyl that has been exposed to frost cycles and summer heat can begin to crack across its surface. This is particularly visible on large flat panels like side doors and roof sections. Once the material starts crazying, it cannot be repaired - it needs to come off.
  • Bubbling: Air or moisture trapped beneath the film causes bubbles. This can happen if the original application was rushed, if the surface wasn't properly cleaned before fitting, or if the vehicle was driven in cold conditions too soon after wrapping. Bubbles are not just unsightly - they indicate the film is delaminating.
  • Inconsistent branding across the fleet: This is a subtler problem but just as damaging. If your business has grown by adding vehicles over the years, each one may have been signed at a different time by a different supplier, with slightly different fonts, slightly different colours, slightly different layouts. To a customer, it looks like a collection of unrelated vehicles rather than a professional operation.
  • Outdated contact details or branding: Phone numbers change. Websites change. Business names and logos evolve. If your vans still carry an old number or an old logo, every vehicle becomes a source of confusion for potential customers.

What Causes These Problems in the First Place

Understanding why these issues occur helps you make better decisions when you commission new fleet wrapping work. The most common root cause is poor surface preparation. Vinyl film adheres to the paint underneath, and any contamination - grease, wax, silicone, or even hand oils from handling panels during fitting - creates a weak bond that fails over time.

A second common cause is using the wrong material for the application. There are different grades of wrap film suited to different panel shapes, vehicle types and expected service lives. A flat-panel transit-style van is straightforward to wrap. A vehicle with deep recesses, compound curves around wheel arches or textured panels requires a more conformable film and more experienced fitting. Applying a stiffer material to a complex shape puts the film under constant stress and it fails early.

Fitting in unsuitable conditions is another factor. Vinyl application should ideally be done indoors at a stable temperature. Film applied in cold or damp conditions is harder to work with and more likely to fail at the edges. We work at your premises, so a decent sized covered space makes a real difference to the quality of the finished job.

Finally, some failures come down to the printing itself. Inferior inks or printing processes that aren't UV-stable will fade much faster. Because we design and print in-house, we control the whole process from colour profile through to the finished print, which means we can be consistent across every panel and every vehicle in your fleet.

What a Properly Wrapped Fleet Actually Looks Like

A well-executed fleet wrap has clean, sharp edges at every panel join. Colour is consistent across every vehicle because it comes from the same print run with the same colour profile. Graphics line up correctly at doors and tailgates. There are no bubbles, no lifting edges and no visible seams where the film has been poorly positioned.

Branding should be legible at distance and at speed. Contact details need to be large enough to read from a following vehicle. Your logo should reproduce faithfully rather than being approximated by a vinyl cutter working from a poor-quality file. All of this matters because a vehicle on a road is seen for about two seconds - the impression has to land quickly and cleanly.

Fleet Wrapping vs. Partial Wrapping vs. Vinyl Lettering

Not every situation calls for a full wrap. If your vehicles are in good condition and the bodywork colour works as a background, high-quality cut vinyl lettering or printed panel graphics can be highly effective and more cost-efficient for smaller fleets. A full wrap makes more sense when you want to change the base colour, cover a large amount of bodywork, or achieve a highly detailed photographic or complex graphic design.

Partial wraps - covering specific panels such as the sides and rear but leaving the cab or roof in the vehicle's original colour - sit between the two in both coverage and cost. They can look excellent when designed with the vehicle's colour in mind. The key is to design for the vehicle rather than trying to adapt a flat print design.

Wrap Removal: What to Know Before You Start

One practical point worth raising before you commission any fleet wrap: existing vinyl or graphics need to come off cleanly before new material goes on. We offer wrap removal as part of what we do. Old graphics that have been on a vehicle for a long time can leave adhesive residue, and in some cases - particularly on older or repainted bodywork - removing vinyl carelessly can lift paint. A proper removal process uses heat and the right solvents to lift film cleanly without damaging the substrate underneath.

If you're buying second-hand vehicles to add to your fleet, check the condition of any existing branding before the vehicles arrive. Knowing what's there, and how long it's been there, helps us plan the removal and prep stage accurately.

Get Your Fleet Looking Right

We're based in Northampton and cover Kettering and the surrounding area. We come to you and design and print in-house. If you've spotted any of the warning signs above, call us and describe what you're seeing - we'll give you a straight answer on whether a repair, a partial re-do or a full fleet wrap is the right approach for your situation.

Why use us in Kettering

  • Your design shown on your vehicle before printing.
  • Graphics designed and printed by us.
  • We fit at your premises in Kettering.
  • We are insured.

Fleet Wrapping and Branding in Kettering?

Phone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.

Call Quote