Covering Northampton and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Commercial Vehicle Wrapping in Rushden - What Happens From First Contact to Finished Van

If you've never had a vehicle wrapped before, it helps to know exactly what the process involves - here's how a commercial wrap job works from the initial call through to your van going back into service.

5.0 from 9 Google reviews Est. 2020 Quoted in writing first Nothing printed until you sign off the proof Fitting arranged at your site

Step One: The Enquiry and Initial Brief

The first conversation is about understanding what you need. We'll ask about the vehicle type and size, whether you want a full wrap, partial wrap or cut vinyl graphics, and what your branding requirements are. If you already have artwork files and a brand style guide, let us know. If you're starting from scratch, that's fine too - we design in-house.

It helps if you can tell us the vehicle's make, model and year. Van body dimensions change between model years, and the template we use to lay out your artwork needs to match your specific vehicle accurately. Getting this right at the brief stage saves time later. If you're unsure of the exact variant, the vehicle's registration will tell us what we need to know.

Step Two: Design

Once we have the brief, we produce artwork. We work from scaled vehicle templates that map out every panel, seam, door edge and recess on your specific vehicle. Good commercial vehicle artwork accounts for the areas that will wrap around door frames, over rivets or into recesses - it's not the same as designing a flat poster.

Artwork is submitted to you as a visual for approval. This shows how the design will sit on the vehicle, including where panel seams and handles fall. Take time to review this carefully. Changes to artwork after print are costly, so checking the proof thoroughly - including spelling, phone numbers, website addresses and any regulatory details - is a step worth taking seriously.

Colour accuracy on screen is always approximate. If you need colours matched precisely to your brand standard, ask for a physical print proof before the full job goes to print. This adds time but avoids surprises.

Step Three: Print

We print in-house at our Northampton base. Printing in-house means we control the output quality directly - we're not dependent on a third-party trade printer's queue or colour calibration. The printed film is laminated immediately after printing. The laminate bonds to the ink and the vinyl, protecting the print from abrasion, UV and road contamination.

Fleet jobs take longer, and we plan the print schedule so that all vehicles in a batch are produced to the same colour standard in the same print run wherever possible.

Step Four: Vehicle Preparation

This is the step that determines how well a wrap adheres and how long it lasts - and it's the step that cheap or rushed wrap jobs most often shortcut. We come to your premises in Rushden to carry out the fitting, so the vehicle stays at your site throughout.

Before any film goes near the vehicle, the surface is cleaned thoroughly. That means degreasing all panel surfaces, removing any wax or polish residue, cleaning around door seals and into recesses, and drying the surface completely. Any contamination left on the bodywork will prevent the adhesive bonding correctly and will cause lifting or bubbling later.

We also inspect the bodywork at this point. Rust, deep scratches, dents with sharp raised edges, or previous wrap adhesive residue all need to be noted before fitting starts. A wrap applied over uncleaned adhesive residue, rust or sharp body damage will fail early at those points. If we spot anything significant, we'll tell you before we start.

Step Five: Fitting

Fitting a commercial wrap is a skilled, methodical job. The printed film is positioned on each panel, checked for alignment, and then applied progressively using application tools to press the film down without trapping air. For areas with compound curves - around wheel arches, door mirrors, cab corners - the film is heated with a heat gun to make it conform to the shape rather than bridge across it. Bridging, where the film spans a recess rather than pressing into it, is a common cause of edge lifting later.

Seams - where two pieces of film meet - are planned to fall in logical places, ideally along existing panel lines or body seams, so they're as unobtrusive as possible. On a panel van, door edges are a natural seam point. On Luton box vans with large flat body panels, seams in the printed film are unavoidable on wide designs and are planned carefully in the artwork stage to minimise their visual impact.

Door handles, number plate housings, lights and mirrors are either removed if practicable or the film is cut and wrapped neatly around them. Cutting film in situ requires precision - ragged cuts at handles or lights are a hallmark of poor fitting.

Large vehicles - Luton box vans, minibuses and HGV cabs - take more time than a standard Transit-sized panel van. Larger vehicles or complex designs take longer. Fleet jobs are planned across multiple days at your site.

Step Six: Final Check

Once fitting is complete, we go over the whole vehicle in good light. We're checking for any edges that need additional pressure, any small air pockets that can be worked out, and that all cuts around handles, plates and trim are clean. This final inspection in good light is important - details that are easy to miss in a dimly lit yard stand out clearly under proper lighting.

We'll walk you around the finished vehicle so you can see the result yourself before we pack up. If there's anything you want to query, that's the time to do it.

Step Seven: Clean-up and Handover

All offcuts, packaging and waste are taken away by us. The vehicle is ready to return to service. There's no requirement to keep the vehicle off the road for a curing period - it can be driven immediately. We'd advise avoiding pressure washing the vehicle for the first few days after fitting to give the adhesive time to fully bond, particularly around edges.

We also carry out wrap removal. If you have old livery on the vehicle that needs to come off before the new wrap goes down, that's part of the same job. We remove old film cleanly before the preparation and fitting stage begins.

Ready to Get Started in Rushden?

When choosing a wrap company, check that it is insured and whether it will come to you. If you're in Rushden or the surrounding area and you want to know what's involved for your specific vehicles, call us to talk through the job and arrange a visit.

Why use us in Rushden

  • Your design shown on your vehicle before printing.
  • Graphics designed and printed by us.
  • We fit at your premises in Rushden.
  • We are insured.

Commercial Vehicle Wrapping in Rushden?

Phone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.

Call Quote