Covering Northampton and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Full Van Wraps in Rushden - The Job From First Look to Final Clean-Up

If you have never had a van wrapped before, knowing exactly what happens at each stage - from the first conversation to driving away with the finished vehicle - takes the uncertainty out of the process entirely.

5.0 from 9 Google reviews Est. 2020 Quoted in writing first Nothing printed until you sign off the proof Fitting arranged at your site

Step one: the initial conversation

Everything starts with a phone call or message. At this stage we need three pieces of information: the make, model and year of your van, the current condition of the paintwork, and what you are trying to achieve with the wrap. That last point matters more than it sounds. A tradesperson wanting bold contact details and a logo has different requirements from a fleet manager wanting six matching vans to present a uniform brand identity.

Van age and paint condition affect what is possible. A wrap applied over peeling lacquer or heavily chipped paint will not bond correctly and will not look right. We will ask about this honestly. If the paint needs attention before the wrap can go on, it is better to know that before the job is booked rather than on the day we arrive. For vehicles in Rushden, we come to you, so there is no need to arrange transport to a workshop.

Step two: design

Once the brief is agreed and the job is booked, the design work begins. We design in-house, working from your artwork, your logo files and your brief. If you have an existing brand identity, we build the wrap design around that. If you are starting from scratch, we work with you to develop a layout that suits the panels of your specific van model.

Vans are not flat canvases. Every model has different proportions, different handle positions, different bodyline creases and different wheel arch shapes. A design that works well on a Transit may need significant adjustment to work on a Sprinter or a Traffic. We template to the actual vehicle model, not to a generic van outline. This matters because a design that is not set up for your van will have logos landing in the wrong place, text disappearing behind handles, or graphics wrapping awkwardly around panel edges.

We provide proofs for your approval before anything goes to print. This is the right moment to request changes - not after the film has been printed. Colour on screen is never identical to colour in print, so if colour accuracy is critical to your brand, talk to us at the proof stage and we can run test prints before committing to the full job.

Step three: print and production

Once the design is approved, it goes to print on our wide-format printer at our Northampton base. We print and laminate in-house. The laminate is applied as a separate process over the dried print, then the panels are allowed to outgas - a period during which any residual solvents in the inks escape before the film is applied to a vehicle. Skipping or shortening the outgassing period is a common cause of bubbling in finished wraps. We do not rush this stage.

Printed panels are cut to shape and prepared for fitting. Any intricate elements such as overlapping joints, contour cuts around body details, or separate pieces for door shuts and door handles are prepared at this stage so fitting runs smoothly.

Step four: surface preparation on the day

We arrive at your premises in Rushden on the agreed fitting day. The first thing that happens before any vinyl is unrolled is surface preparation. The vehicle is cleaned thoroughly - not just a rinse, but a proper decontamination of the panels to remove wax, polish, grease, traffic film and any silicone residue from cleaning products. Any of these left on the paint will prevent the adhesive from bonding properly.

Panel edges, door shuts, the edges of the bonnet and the lower sills get particular attention because these are the areas most prone to lifting. If there are any surface issues we did not know about from the initial conversation - minor rust bubbles, poorly cured filler repairs, flaking lacquer in a hidden spot - we will flag these before wrapping over them. Wrapping over a problem conceals it temporarily but does not fix it, and the wrap will fail in that area.

Step five: fitting the wrap

Fitting a full wrap is a methodical job. We work panel by panel, applying the film with squeegees and heat to conform the vinyl around all the body details. Heat is used to stretch the film into recesses - around handles, along body creases, into the gutters above the doors. Applied correctly, the film follows the panel shape and lies flat without tension. Applied in too much of a hurry, the vinyl is over-stretched, which can cause it to lift as it tries to relax back.

Joints between panels are planned so they fall in natural breaks - door edges, panel lines, the junction between the cab and the body on panel vans. Good joint placement makes the finished wrap look seamless. Poor joint placement - joints running across the middle of a flat panel, for example - is obvious on close inspection and is a sign of rushed planning.

Door handles, number plate lights, aerials and other fittings are either removed if that is practical, or the film is cut and wrapped around them precisely. The rear door area, with its hinges and locking hardware, is one of the more time-consuming sections of a full wrap to do well.

A full wrap on a large panel van typically takes a full day to fit correctly. Smaller vans take less time. Any quote that includes fitting a full Sprinter-sized wrap in two or three hours should raise questions about what corners are being cut.

Step six: inspection and sign-off

When the fitting is complete, we go over the whole vehicle with you. We are looking for any lifted edges, any area where the film has not fully conformed, any joint that needs re-pressing, and any marks from the fitting process. Any issues found at this stage are addressed before we leave.

You get a chance to inspect the finished vehicle in full. If there is something you are not happy with, say so at this point. We would rather spend an extra thirty minutes getting a detail right on the day than have you driving away with a concern.

Step seven: post-fit care advice

Before we pack up, we will explain what the wrap needs in the first 48 to 72 hours. The adhesive is still curing during this period, and the film should not be subjected to pressure washing, immersion in water or parking for extended periods in full direct sun. After this initial period, care is straightforward: gentle hand washing or touchless washing, avoid narrow-angle jet washing directly at panel edges, and avoid harsh solvent-based cleaning products.

Wrap removal

When the time comes to update the design or if you are returning a leased vehicle, we carry out removal as well as installation. Removal is done with heat to soften the adhesive, working the film off in controlled sections to avoid paint damage. The cleaner the original paintwork was when the wrap went on, and the better the material used, the more straightforward the removal will be.

Book your full wrap in Rushden

When choosing a wrap firm, it is worth asking whether they will come to you, whether they are insured, and whether they design and print their work in-house. To get a quote for your van in Rushden, call us with the make, model and what you have in mind - we can usually give you a ballpark figure quickly and arrange to view the vehicle at your premises to confirm it.

Why use us in Rushden

  • Your design shown on your vehicle before printing.
  • Graphics designed and printed by us.
  • We fit at your premises in Rushden.
  • We are insured.

Full Van Wraps in Rushden?

Phone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.

Call Quote