Covering Northampton and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Lorry and HGV Graphics in Rushden - The Job From First Look to Finished Vehicle

If you've never had HGV graphics fitted before, or you've had a bad experience with a previous supplier, here is exactly what the process looks like from the first conversation to driving the vehicle away.

5.0 from 9 Google reviews Est. 2020 Quoted in writing first Nothing printed until you sign off the proof Fitting arranged at your site

Step 1: The Initial Conversation and Brief

The job starts with a conversation, not a quote. Before any price can be put together accurately, we need to know what you've got and what you need. That means: the make, model and year of each vehicle or trailer, whether there are existing graphics to remove, what surface types are involved (smooth bodywork, curtainsider, riveted alloy, refrigerated box), and what you want the finished result to look like.

Bring whatever brand assets you have - your logo in its original file format if possible, your brand colour references (Pantone or CMYK values if you have them), and any examples of livery you like or want to match. If you have nothing at all to start with, that's fine too - we can design from scratch. But the more you bring, the faster and cheaper the design stage is.

It also helps to know your fleet cycle. If a vehicle is coming up for replacement in eighteen months, the material and design spec should reflect that. If a trailer is going to run for the next five years, that changes what we recommend.

Step 2: Vehicle Survey

For anything beyond simple cab lettering, we need to see the vehicle in person before we finalise the design and quote. We come to your yard or depot near Rushden to do this - you don't bring the lorry to us.

During the survey we check the panel condition. Graphics applied over rusty, dented or poorly repaired panels will fail early - the vinyl can only be as good as the surface beneath it. We'll flag any panels that need attention before we can fit. We also measure accurately, because a trailer that looks like a standard curtainsider often has non-standard panel dimensions, and we build the artwork to the actual measurements rather than generic templates.

We check whether existing graphics are present and what they're made of. Old, brittle vinyl takes longer to remove than recently applied film and can leave adhesive residue that needs cleaning off before new graphics go on. Knowing this upfront means the quote covers it rather than surprises turning up on the day.

Step 3: Design and Artwork Approval

Once we have the brief and the measurements, we produce a visual. We work up the design to show you how the livery will look on the actual vehicle, including the panel layout, colour placement and any text positioning. This is a proper vehicle visual, scaled to your trailer or lorry, not a generic mockup.

Colour accuracy matters here. If you have brand colour standards, we match to those in the print. If the design includes photographic imagery, we'll advise if any supplied images are too low-resolution to print cleanly at trailer scale - a logo that looks sharp on a business card can look poor at two metres wide if the original file isn't high enough quality.

We go back and forth on the visual until you're happy. Changes at this stage cost nothing and take minutes. Changes after the vinyl has been printed are expensive, so getting the design signed off properly before we go to print is worth the time it takes.

Step 4: Print Production

We print in-house. That means we're not sending your artwork to a third-party printer and hoping the output matches what was approved. The same team that handled your design runs the print, checks colour accuracy against the approved visual, and applies the laminate.

Print is produced on wide-format equipment capable of covering full trailer widths in a single pass, minimising the number of joins in the finished livery. Fewer joins means fewer potential failure points and a cleaner finished result.

The laminate is applied immediately after printing and before the film goes anywhere near a vehicle. This seals the print, adds UV protection and gives the film the surface finish - gloss, satin or matt - that was agreed at design stage. At this point the graphics are quality-checked for colour consistency, print defects and laminate coverage before they leave our premises.

Step 5: Surface Preparation on the Day

We come to you for the fit. The vehicle needs to be accessible, sheltered from direct rain if possible, and reasonably clean before we arrive - heavily caked mud and grime on the panels adds time to the prep stage. We carry out our own preparation on site, which includes:

  • Degreasing all panels to be wrapped, using a panel wipe to remove any silicone, wax or fuel contamination
  • Cleaning around all edges, rivets, joints and door seals where the film will terminate
  • Removing existing graphics if that's part of the job, using heat guns and specialist tools to lift the film without scoring the paint, then removing any remaining adhesive residue
  • Allowing the panels to dry fully before any new vinyl goes on

Skipping or rushing surface preparation is the single biggest cause of premature adhesion failure. We don't cut corners here because a graphic that starts lifting within months is a problem for everyone.

Step 6: Application

The graphics go on panel by panel, working methodically across the vehicle. On a full trailer wrap, that means working from one end to the other, keeping the film under consistent tension as it's applied to avoid distortion, and using heat where needed to get the film to conform around rivets, corrugations and panel joins.

Edges are worked into recesses and around joints wherever possible, rather than leaving a cut edge exposed on a flat surface. Exposed edges are more vulnerable to lifting; tucked and sealed edges last significantly longer. On curtainsider trailers where the film runs to the edge of the frame, we seal the cut edge to prevent moisture getting underneath.

Bubbles are worked out during application using squeegees. Any stubborn bubbles are dealt with using a fine needle to release the air, then the film is pressed flat. A correctly applied graphic should have no visible bubbles once the job is complete.

Step 7: Final Check and Clean-Up

Once every panel is finished, we walk the whole vehicle. We check every edge, every join, every rivet cutout and every corner. Any area that isn't sitting correctly gets reworked before we consider the job done. Text alignment is checked against the approved visual. Colour consistency across panels is checked in natural light where possible.

We clear our tools and materials from the site and leave the vehicle clean. The graphics need a short settling period for the adhesive to fully cure - we'll tell you what to avoid in the first few days, including whether to hold off on washing and what cleaning methods to use going forward to get the best life from the graphics.

HGV and Lorry Graphics Fitted at Your Rushden Premises

Every step above happens at your location near Rushden - we come to you. We handle the whole job from design through print to fit. If you have graphics to remove first, we do that too. Call us to arrange a vehicle survey and we'll put a proper quote together based on what you've actually got.

Why use us in Rushden

  • Your design shown on your vehicle before printing.
  • Graphics designed and printed by us.
  • We fit at your premises in Rushden.
  • We are insured.

Lorry and HGV Graphics in Rushden?

Phone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.

Call Quote