If you've never had a minibus wrapped or sign-written before, here's exactly what happens from your first call to the moment we pack up and leave your site in Rushden.
It starts with a conversation. When you call or message us, we need to know the make, model and year of the minibus, what you're after (full wrap, partial graphics, cut vinyl lettering, or a combination), and whether you have artwork ready or need us to design from scratch. Photos of the vehicle are very useful at this stage because body shapes vary significantly - a Ford Transit minibus and a Mercedes Sprinter conversion sit very differently, and their panel lines, door positions and body curves all affect how a design is laid out.
We'll also ask about access. Is there a covered area at your premises where we can work? Vinyl application is best done out of direct sunlight and away from wind-blown dust. A unit, garage or even a large open-sided canopy works well. We come to you in Rushden and the surrounding area, so the work is carried out at your site.
If you have an existing brand with logo files and colour references, we work from those. Vector files (AI, EPS, PDF with outlines) are ideal because they scale cleanly to any size without loss of quality. JPEG or PNG logos can usually be worked with but may need redrawing if they're low resolution.
If you need a design created from scratch, we do that in-house. We'll ask about your brand, what the vehicle is used for, who the audience is, and what tone you want - bold and attention-grabbing, clean and professional, or something more specific to your sector. We produce a visual proof that shows the design laid over a template of your vehicle's body shape before anything is printed. You review and approve it, and we make amendments until it's right. Nothing goes to print until you've signed off on the design.
It's worth giving this stage proper attention. Changes are easy on screen and cost nothing. Changes after printing waste material and cost real money, so get the proof right.
We print in-house, which keeps the process under our control. The design is output at the correct scale onto vinyl film, with colours managed to match the approved proof as closely as the material allows. Screen colours and printed colours are never identical - screens are backlit and use a different colour model - so for critical brand colours it helps to specify a physical colour reference (such as a Pantone number) rather than relying on what looks right on a monitor.
Once printed, the vinyl panels are laminated. This is not optional for any printed graphic going on a vehicle that will be driven in all weathers. The laminate protects the inks from UV, fuel, road grime and pressure washing. After lamination the panels are trimmed to size, checked for any print defects, and prepared for fitting.
This is the step that separates a graphic that lasts from one that starts lifting within a year. The vehicle's painted surfaces need to be thoroughly clean before any vinyl goes on. That means washing off road dirt, then degreasing the panels with an appropriate solvent solution to remove wax, silicone and traffic film. Wax and silicone are particularly problematic because they're invisible to the eye but actively prevent the adhesive bonding properly.
Any areas with minor surface contamination, old adhesive residue from previous graphics, or stone chip damage need to be treated individually. We also check panel temperatures - applying vinyl in cold conditions without heat is a risk, and working in direct summer sun on hot metal causes its own problems. Getting the conditions right is part of the job.
Large panels are typically applied wet (using a diluted application fluid that allows the vinyl to be repositioned before it's finally squeegeed down) or dry, depending on the material and the complexity of the panel. Wet application gives more time to position large graphics accurately. Dry application gives a faster initial tack, which suits smaller pieces.
Once a panel is positioned, it's squeegeed firmly from the centre outward to remove all application fluid and air. Edges are worked down carefully, particularly around door shuts, trims and body creases. On compound curves, heat is used to soften the vinyl so it conforms to the shape rather than bridging across it. Bridging - where the vinyl sits taut across a recess rather than moulding into it - is a common failure point and needs to be avoided during fitting, not corrected afterwards.
Door handles, mirrors, antenna bases and other protrusions all need careful cutting and wrapping. This is skilled work and it takes time. Rushing it is how air pockets and lifted edges start.
Once the graphics are applied, we go over the whole vehicle systematically. We check every edge, every cut line, every section around door furniture and windows. Any small lift or bubble that can be corrected on the day is dealt with before we consider the job done. We're checking for consistent adhesion, clean cut lines and correct positioning against the approved design.
We also check that any areas around door shuts and openings work correctly - graphics that cross door gaps need to be cut so the door opens cleanly without catching or peeling the edge.
Before we leave your site in Rushden, we'll tell you what to avoid in the first 24 to 48 hours while the adhesive finishes curing. That typically means no pressure washing directly at graphic edges, no automated roller washes, and keeping the vehicle out of standing water where possible. These are short-term precautions - the adhesive needs a little time to reach full strength.
For longer-term care: hand washing or touchless washes are kinder to applied graphics than brush-based automated systems. Avoid high-pressure jets directed straight at edges. Those habits will extend the life of the graphics significantly.
We also carry out full wrap removal as a standalone job. Vinyl comes off cleanly from sound paintwork when it's done correctly, using heat to soften the adhesive and careful technique to avoid lifting the paint underneath. If the wrap is old and brittle, it takes longer. We clean off any adhesive residue left behind, so the panels are ready for new graphics or respraying as needed.
We're based in Northampton and travel to customers across the area including Rushden. Call us with the details of your vehicle and what you're after, and we'll walk you through what the job involves and what it will cost before anything is committed.
Also available
We design, print and fit full or partial van wraps in Northampton, working at your premises so your vehicle never needs to leave your site.
See detailsWe wrap commercial vehicles of all types across Northampton, from small vans to large panel vans and specialist bodies.
See detailsWe design, print and fit branded wraps across entire vehicle fleets in Northampton, ensuring every vehicle in your fleet looks consistent.
See detailsPhone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.