If you've never had van graphics fitted before, knowing what to expect from the process - start to finish - helps you plan around the job and avoid any surprises.
The process starts with a conversation, not a sales pitch. Before any design work begins, we need to know what the van is, what the graphics need to do commercially, and what your budget is. These three things shape every decision that follows.
The vehicle matters because different van models have different panel shapes, different surface textures and different bodywork profiles. A Transit and a Sprinter don't just differ in size - the angles on the panels, the door configurations and the positions of features like door handles, hinges and character lines all affect how a graphic is designed and where seams need to fall. We'll ask for the make, model and year of the van, and ideally a few photographs of it in its current state.
What the graphics need to do commercially means: is this primarily about being found (phone number, trading name, service area), about brand identity (consistent with your other marketing), or about maximum visual impact to stand out in Rushden and the surrounding area? The answer changes the design approach significantly.
We design everything in-house at our Northampton base. We'll produce a visual showing the layout on a template matched to your vehicle. This is a proper design visual, not a generic van outline with text dropped in - it shows the actual panel areas, the colour relationships, and how the design handles the transitions between panels.
At this stage you'll see the typography, the colour palette, the positioning of your logo and contact details, and how the overall layout reads. If your existing brand has a logo and brand colours, provide those files and colour references at the start. If you don't have an established brand, we work from your direction - your trade, your preferred colours, the tone you want.
Revisions happen at the design stage, not after the graphics are printed. That's why it's worth taking the time here to get the layout genuinely right. Check that your phone number is correct, that your website address is included if you want it, and that the most important information is prominent enough to read from the distance a passing driver or pedestrian will see the van.
Once the design is approved, we print in-house on our wide-format printer. Printing in-house means we see the output directly and can verify that the colours match the approved design before the job proceeds. If something looks off in print, we know immediately and can correct it without the delay of dealing with an external supplier.
Printed graphics are laminated after printing. The laminate - a clear protective film applied over the ink surface - is not an optional extra. On a working van, the graphic is exposed to UV light, rain, fuel, cleaning products and physical contact every day. The laminate protects the ink from all of these. The finish can be gloss or matt depending on the look you want. Gloss tends to make colours more vivid; matt gives a flatter, more contemporary result.
Cut vinyl elements - solid-colour lettering, logos or borders - don't require printing. They are cut to shape from a coloured film and can be combined with printed sections in the same job where it makes sense to do so.
This is the step most people don't see and the one that makes the biggest difference to how long the graphics perform. No graphic, however well designed and printed, will bond properly to a contaminated surface.
Surface preparation involves:
Wax is the most common problem. Most vans are cleaned with wax-containing products regularly, and the wax builds up invisibly on the surface. It is invisible to the eye but completely disrupts the adhesive bond. If this step is skipped - as it is by some installers cutting corners - the graphic will begin to lift at the edges within months, particularly in cold or wet conditions.
We come to you. The fitting is done at your premises or wherever the vehicle is based in or around Rushden. You don't need to bring the van to us or arrange alternative transport for a day.
Application temperature matters. Vinyl adhesive bonds correctly at surface temperatures of roughly 15-25°C. If the van has been sitting outside overnight in cold weather, the panels need time to warm before the film goes on. We'll assess conditions on arrival and work accordingly. Rushing the application in unsuitable conditions is one of the main causes of adhesion failure on jobs done by less careful operators.
Printed sections are applied panel by panel, with seams positioned where they'll be least visible - typically at natural bodywork breaks like door edges. Air is worked out from under the film using specialist squeegees. Around complex areas such as door handles, mirrors, hinges and rivets, the film is heated gently and worked into the surface to get a flat, conforming result.
Post-heat is applied after the initial application. This is a final pass with a heat gun over all the applied sections, particularly edges and around curves. It activates the adhesive fully and locks the film flat. Without post-heat, edges remain vulnerable.
Once all sections are applied, the whole vehicle is inspected in good light. We're looking for any lifted edges, air bubbles that need addressing, or areas around door handles and hinges where the film needs additional attention. Any issues found at this point are fixed before we leave.
We clean up after the job - trimmings, backing paper and any materials used in preparation are removed from your site. You're left with a finished van, not a tidy-up job to do yourself.
If your van has existing graphics that need removing before new ones go on, this is factored into the job from the start. Old vinyl that has been on a vehicle for several years can be firmly bonded and needs careful removal with heat to avoid pulling the paint. Adhesive residue left by old graphics must be fully cleaned off before the new application - residue left behind will show through the new graphic and will cause localised adhesion problems.
We offer removal as a separate service or as part of a full refurbishment. If the old graphics are only a year or two old and have been well applied, removal is usually more straightforward. Older material can take longer, particularly on vehicles that have spent years outdoors.
We design and print in-house, and travel to your location in and around Rushden to carry out the work. If you're ready to discuss a new set of van graphics, call us and we'll talk through the process, the design options and the timescale for your specific vehicle.
Also available
We design, print and fit full or partial van wraps in Northampton, working at your premises so your vehicle never needs to leave your site.
See detailsWe wrap commercial vehicles of all types across Northampton, from small vans to large panel vans and specialist bodies.
See detailsWe design, print and fit branded wraps across entire vehicle fleets in Northampton, ensuring every vehicle in your fleet looks consistent.
See detailsPhone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.