Here is exactly what happens from the moment you call Van Wrapping Northampton to the moment your signwritten van is back on the road in Rushden.
The process starts with a conversation, not a template form. We need to know what vehicle you have, whether you already have a logo and brand colours, what text needs to go on the van, and roughly where you want it. The vehicle make and model matters because panel sizes, body lines and any factory trim or mouldings all affect where graphics can sit and what size lettering is realistic.
If you have a logo file, the most useful format is a vector file, usually an .ai, .eps or .pdf saved from a vector application. This can be scaled to any size without losing quality. If you only have a low-resolution image file, we can discuss whether it is usable or whether it needs to be redrawn. Many tradespeople only have a logo on their letterhead or website and have never needed the original vector, so this is a common situation and not a problem we cannot work around.
We produce the design in-house. We work up a layout to your panel dimensions and show you how the text hierarchy sits: typically business name largest, then services or trade descriptor, then the phone number and website. The phone number needs to be large enough to read from a vehicle two or three cars back in traffic, which in practice means it needs to be considerably bigger than it might look in a logo or on a business card.
Colour contrast is checked at this stage. Light lettering on a dark van, or dark lettering on a light van, is the standard for legibility. We flag any combinations that will cause reading problems at distance before anything goes to print, not after. If you want to see how the design sits on a photo of your actual van, we can show you a visual before anything is committed to material.
Approvals are straightforward. You confirm the design and we move to production. Any changes to text, colour or sizing are made at this stage, before the vinyl is printed or cut, because changes after production mean reprinting and that costs time and material.
Once the design is approved, we print or cut the graphics in-house. For printed graphics, the design goes through our wide-format printer onto vinyl film, then a protective laminate is applied over the print layer before it is trimmed to size. The laminate protects the ink against road grime, washing and UV. Without it, the print layer on a working vehicle would degrade relatively quickly.
For cut vinyl, the approved artwork is sent to the cutter, which plots the letterforms and shapes precisely. The vinyl is then weeded - the waste material around the letters is removed by hand - and the remaining graphics are covered with a transfer tape ready for application. This stage requires patience, particularly on designs with fine detail or close spacing between characters.
Production time depends on the complexity of the job. A straightforward cut-vinyl text layout on a single van can move quickly. A multi-panel printed design for a fleet takes longer, particularly if colour matching across multiple panels needs to be verified before we commit to the full run.
We come to you in Rushden. The vehicle does not need to come to us. When we arrive, the panels that are going to receive graphics need to be clean, dry and free of contamination. We carry out the final surface preparation ourselves, which includes degreasing and removing any silicone residue from polish or detailer products. Silicone is the main enemy of vinyl adhesion; it is invisible on the panel surface but it prevents the adhesive from bonding properly.
We also check panel condition at this point. Any lifting paint, corrosion bubbles or old adhesive from previous signwriting will telegraph through new vinyl and affect the finished result. If there is an issue we find at this stage, we will tell you before we apply anything, not discover it halfway through the job.
The vehicle needs to be in a sheltered spot if possible, away from direct rain. Cold temperatures slow the adhesive's ability to bond, so very cold days present more of a challenge than mild ones. We work around the conditions, but if the weather is genuinely unsuitable we will say so rather than apply graphics that will not bond correctly.
Application is methodical work. Each panel is approached individually. For cut vinyl lettering, the transfer tape is positioned carefully against the panel, the backing is removed progressively, and the vinyl is laid down and squeegeed firmly from the centre outward to push out air. Around any recessed areas, curves or body lines, additional heat and pressure are used to get the vinyl to conform to the surface properly. Any area where the vinyl is stretched over a recess is a point of potential failure if it is not worked in correctly.
For printed panels, the same approach applies, but alignment across joins or across multiple panels requires more care. A design that runs across a door and onto a fixed panel either side needs to line up when both doors are closed. Getting that right requires careful measurement and positioning before the backing comes off.
Lettering around windows, door handles and mirrors is fitted with appropriate relief cuts to allow the vinyl to wrap into the recesses without lifting at the edges. These small details are what separates a tidy, lasting application from one that starts peeling within months.
Once everything is applied, we go over the full van systematically. Every edge is checked for proper adhesion. Any small air bubbles that have not settled are worked out. We check that all text is correctly positioned and level by eye and by measurement. Any small trimmings or offcuts from the material are cleared away before we leave.
You then get a chance to look over the finished van yourself. If anything is not right, that is the moment to say so, while we are still there with the tools to address it. We do not leave until you are satisfied with what you can see.
For the first day or two after application, the adhesive is still reaching full bond strength. Keeping the van out of a jet wash during that period is sensible. After that, normal washing is fine. Avoid pressure-washing directly at the edges of the vinyl, which can lift them over time. Hand washing or a gentle touchless wash is kinder to applied graphics than a drive-through brush wash, which can catch edges and stress them progressively.
When the van is eventually sold or the signwriting needs updating, we also carry out vinyl removal. Properly applied vinyl on sound paintwork should come away cleanly, and we treat any adhesive residue left on the panels as part of the removal process.
If you are ready to get your van signed up, or you have questions about any part of the process, call Van Wrapping Northampton. We come to you in Rushden and handle everything from design through to fitting. Tell us what vehicle you have and what you want it to say, and we will take it from there.
Also available
We design, print and fit full or partial van wraps in Northampton, working at your premises so your vehicle never needs to leave your site.
See detailsWe wrap commercial vehicles of all types across Northampton, from small vans to large panel vans and specialist bodies.
See detailsWe design, print and fit branded wraps across entire vehicle fleets in Northampton, ensuring every vehicle in your fleet looks consistent.
See detailsPhone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.