Covering Northampton and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Vehicle Graphics in Rushden - How the Job Works, Start to Finish

If you are arranging vehicle graphics in Rushden for the first time, knowing exactly what happens from enquiry to finished vehicle means no surprises and a better result.

5.0 from 9 Google reviews Est. 2020 Quoted in writing first Nothing printed until you sign off the proof Fitting arranged at your site

What to Expect When You Get in Touch

The first conversation is about gathering the information we need to give you an accurate quote and a realistic idea of what the finished job will look like. We will ask about the vehicle or vehicles - make, model and colour - and what you are trying to achieve. Are you starting from scratch with no existing brand, or do you have artwork ready to go? Do you want the full vehicle covered, a partial panel, or straightforward lettering?

If you have existing artwork, logos or brand guidelines, send them across at this stage. The more we know about your business, your trade colours and your preferences, the faster we can move into design. If you have no artwork yet, that is not a problem. We handle design in-house.

Step 1: Design

We produce all design work in-house, working from your brand assets or building something new from your brief. For vehicle graphics, design is not just about making something that looks good on screen. It has to account for the specific vehicle template, the panel breaks, the door handles, windows and wheel arches that interrupt a surface, and how the design reads at distance and at speed.

Vehicle templates are drawn to scale for each make and model, so the artwork sits accurately on the actual panels before anything is printed. This is an important step that separates a properly produced vehicle graphic from something designed flat and hoped for the best when applied.

We will show you proofs for approval before anything goes to print. You should check these carefully against the actual vehicle, confirming that text is correct (including phone numbers and web addresses), that colours match your brand, and that nothing is obscured by windows or body features you had not accounted for. Raise any changes at proof stage, as they are far simpler to make than after printing. Changes after the graphics are printed and applied cost real money.

Step 2: Print and Finishing

Once you have approved the design, it goes to print on our wide-format equipment. We print in-house, which means we control the output quality, the colour calibration and the choice of materials. For printed graphics, an over-laminate is applied to the printed surface after printing. This protective layer guards against UV fading, fuel splash, minor surface abrasion and the general punishment a working vehicle takes.

Cut vinyl elements, such as lettering in a single colour, are cut separately and prepared for application. If the job combines printed panels with cut vinyl lettering (a common and cost-effective approach), both are produced and prepared at this stage so the application can run as a single visit.

Print and finishing lead time depends on the complexity and scale of the job. A single van with a straightforward design can move quickly. A fleet of vehicles with complex full wraps takes longer. We will give you a clear timeline at the outset.

Step 3: Surface Preparation

This is the step that is most often underestimated, and it is the one that most determines whether a vehicle graphic lasts. Vinyl graphics rely entirely on a clean, grease-free, dry surface to bond properly. We come to you in Rushden, so we prepare the vehicle on-site at your premises or yard.

Preparation involves washing the vehicle, then panel-wiping every surface that will receive graphics with an isopropyl alcohol solution to remove wax, grease, silicone and any other contaminants. This matters because clean paintwork looks clean, but it can still carry an invisible layer of wax, polish or traffic film that will prevent adhesion. Working temperature also matters. Vinyl film needs to be applied within a reasonable temperature range, and both the vehicle surface and the material itself need to be at that temperature. Applying graphics to a cold van straight out of a yard in winter without allowing it to stabilise will cause problems.

Any areas with existing graphics that need to be removed are dealt with at this stage too. We offer wrap removal, so if there are old graphics, stickers or adhesive residue to come off before new work goes on, we handle that as part of the preparation process.

Step 4: Application

The application process varies depending on what has been designed. Cut vinyl lettering is applied using a transfer tape, which holds the cut pieces in their correct relative positions while the backing paper is removed and the vinyl positioned on the panel. Once in position and pressure applied, the transfer tape is removed.

Printed panels are applied panel by panel, working methodically around the vehicle. For larger sections, air-release lined materials allow the applicator to reposition slightly during the process and work out any bubbles without trapping air permanently. For areas that require the material to conform to curves, recesses or compound shapes, heat is used to stretch the film into position and bond it cleanly.

Edges at panel breaks, around door frames and along body lines are wrapped or finished carefully to prevent lifting later. This is detailed work. A rushed edge wrap is one of the most common reasons graphics start to peel ahead of time.

Step 5: Inspection

Once the application is complete, we go over the whole vehicle in detail before we consider the job done. We are looking for any lifted edges, any bubbles that have not settled, any areas where the material has not conformed fully to a recess or curve, and checking that all text and design elements sit where the proof showed them.

Any areas that need attention are dealt with on the spot, using heat where necessary to re-work the material or applying additional pressure to edges. The goal at this point is a finish that looks correct from every angle the vehicle will be seen from, which on a working van means kerb side, offside, rear and front.

Step 6: Clean-Up and Handover

We clear up any offcuts, backing paper and materials from your site and leave the work area as we found it. At handover, we will walk you around the vehicle and point out anything specific to know about looking after the graphics, including how to wash the vehicle going forward.

Hand washing with a soft cloth and a standard vehicle shampoo is the safest approach for any applied graphics. Automated car washes with rotating brushes will attack edge seams and lifted corners. High-pressure jets aimed directly at graphic edges will force water underneath the material. Knowing this from day one extends the life of the job significantly.

What We Work On in and Around Rushden

We fit vehicle graphics to cars, vans, lorries, trailers and full fleet vehicles. The process described above applies whether we are lettering a single car for a sole trader or applying consistent branding across a fleet of vans. For fleet work, we will often stage the vehicles across multiple visits to minimise disruption to your operation.

We come to you, and we handle everything from design and print to application and removal. If you are ready to get your vehicles in Rushden branded up, call us and we will walk you through what your specific job involves.

Why use us in Rushden

  • Your design shown on your vehicle before printing.
  • Graphics designed and printed by us.
  • We fit at your premises in Rushden.
  • We are insured.

Vehicle Graphics in Rushden?

Phone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.

Call Quote