Covering Northampton and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Commercial Vehicle Wrapping in Duston - What to Do While You Wait (and What to Leave Alone)

If your van in Duston has a wrap problem or you are waiting for a booking to come through, there are practical steps you can take right now - and a few things that look helpful but will make the job harder.

5.0 from 9 Google reviews Est. 2020 Quoted in writing first Nothing printed until you sign off the proof Fitting arranged at your site

What Commercial Vehicle Wrapping Involves

A commercial vehicle wrap covers your panel van, Luton, minibus or HGV cab with a printed film carrying your brand, applied over the existing paintwork. We design, print and fit in-house and travel to customers in Duston and the wider area to carry out the work on your premises. If you are waiting for an appointment, here is how to make the most of that time and avoid creating extra problems.

While You Wait: Gather What the Fitter Will Need

Getting organised before the fitting day saves time on the day and reduces the chance of the job being delayed. If you are having your vehicle wrapped for the first time, have the following ready before the appointment:

  • Your logo in a vector format (AI, EPS or SVG). A JPEG or PNG pulled from a website will not reproduce cleanly at large scale. If you only have a raster file, flag this in advance so the designer has time to work with it.
  • Your brand colour references. Hex codes, Pantone numbers or CMYK values all work. A rough description of the colour is not enough for printing to match.
  • The vehicle registration and an accurate description of the body type (panel van, high-roof, long-wheelbase, dropside and so on). Different body configurations have different panel shapes and the design template needs to be correct before print.
  • Any specific layout preferences - whether you want the rear doors treated as one panel or two, whether the roof needs covering, whether there are areas you want to keep clear (reversing cameras, roof equipment).

If you are having an existing wrap removed and replaced, let us know the age of the current film and whether you know what brand or type was used. That information helps us plan the removal.

What to Do About Damage on the Existing Paintwork

A common problem is surface rust, dents or previous repairs that the customer discovers when looking closely at the vehicle ahead of wrapping. Film does not hide deep bodywork damage - it may conceal shallow scratches, but it will follow the contour of a dent and can even make it more visible by reflecting light differently.

If there is a dent or rust patch you know about, tell us when you book. We will advise whether it needs attention before we can proceed. Do not attempt to sand or treat rust yourself immediately before the wrap appointment - sanding dust left on the surface and exposed bare metal need proper preparation before film goes on. If in doubt, leave it and let us assess it on the day.

Do Not Do These Things While You Wait

These are the actions that customers often take with good intentions but that create extra work or compromise the finish:

  • Do not wax or polish the vehicle. Wax and polish sit on the surface and prevent the film adhesive from bonding properly. If the vehicle has been waxed recently, tell us - the surface will need to be decontaminated before fitting.
  • Do not apply any touch-up paint to chips or scratches. Fresh paint needs weeks to fully cure and harden. Film applied over recently touched-up areas can lift the new paint when it is eventually removed.
  • Do not attempt to remove an existing wrap yourself. Pulling film off cold or without the right heat tools risks lifting paintwork and leaving adhesive residue across the panels. Professional removal uses heat to release the adhesive gradually. We handle removals and the result is a clean surface ready for the next wrap.
  • Do not jet wash the vehicle at high pressure immediately before the appointment. High-pressure washing at close range can force water into panel seams, and if the vehicle is not fully dry when film goes on, moisture trapped beneath the wrap causes bubbling.
  • Do not apply vinyl stickers or magnetic signs to panels you want wrapped. These leave adhesive marks and sometimes surface impressions that need cleaning before film can go on cleanly.

What You Can Do: Get the Vehicle as Clean as Possible

A clean vehicle is genuinely useful preparation. The surface needs to be free of road grime, grease and contamination before the wrap goes on - we carry out our own surface preparation on the day, but starting with a vehicle that has been hand washed recently means less preparation time and a faster start to the fitting.

Use a mild detergent and a clean sponge. Work from the top down. Pay particular attention to the lower sills and door shuts where road salt and grease accumulate. Avoid waxing or polishing after washing.

Preparing the Parking Space or Work Area

We carry out the work at your premises. The vehicle needs to be parked in a clean, sheltered space for the duration of the fitting. Film cannot be applied cleanly in direct sunlight (which causes it to tack too fast), in rain, or in temperatures below around 10 degrees Celsius. If you have an indoor space such as a workshop or large garage, that is ideal. If not, a covered area or at minimum a shaded one on a dry day works for many jobs.

Allow enough room for the fitter to move around all sides of the vehicle freely. Access to a power source is useful but not always required - ask when you book.

If You Operate a Fleet: Use the Wait to Plan Ahead

If you are bringing in one vehicle now and have others in the fleet that will need wrapping later, the wait period is a good time to audit the rest of the fleet. Check which vehicles have wraps that are lifting, fading or showing physical damage. Note down the makes, models and registration years of vehicles that are likely to need attention in the next six to twelve months.

Ordering wraps for several vehicles at once - even if the fitting is spread over a few weeks - means the design and artwork can be prepared together and the film can be printed in a single batch. Batch printing makes colour consistency between vehicles much easier to control than commissioning vehicles one at a time months apart.

Get Your Vehicle Wrapped in Duston

We cover Duston and the surrounding area, travelling to your location and working at your premises. If you have a van or fleet vehicle ready to wrap, call us to talk through the design and book a fitting date.

Why use us in Duston

  • Your design shown on your vehicle before printing.
  • Graphics designed and printed by us.
  • We fit at your premises in Duston.
  • We are insured.

Commercial Vehicle Wrapping in Duston?

Phone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.

Call Quote