Covering Northampton and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Full Van Wraps in Duston - What to Do While You Wait, and What to Leave to Us

If you've booked a full van wrap near Duston - or you're waiting on a quote - here's what you can do to prepare, and what you should definitely leave alone.

5.0 from 9 Google reviews Est. 2020 Quoted in writing first Nothing printed until you sign off the proof Fitting arranged at your site

What a Full Van Wrap Involves

A full van wrap is a printed vinyl film applied across every external panel of your vehicle - both sides, bonnet, roof, rear doors and usually the lower sills and bumpers. The vinyl carries your business branding in full colour and covers the original paintwork entirely while it's in place. When you're ready to rebrand or move the van on, it comes back off.

At Van Wrapping Northampton, we design and print in-house and travel to you in Duston. The fitting takes place at your premises or wherever your van is kept - you don't drop the vehicle off at a fixed workshop.

While You're Waiting for the Fitting Date

There's a useful window between booking and fitting. Making the most of it means the job goes more smoothly and you're not standing around on the day while things are sorted that could have been done beforehand.

Give the Van a Thorough Clean

The single most useful thing you can do before we arrive is clean the vehicle properly. Surface contamination - road grime, grease, old wax, bird deposits - affects how the vinyl bonds. We'll clean the van down ourselves as part of the prep process, but arriving with a genuinely clean vehicle saves time and means we can focus on the fit itself rather than the prep.

Use a standard vehicle shampoo and work over the whole exterior. Pay particular attention to panel edges, door shuts, around mirror housings and the lower sills where grime collects. Rinse thoroughly and dry with a clean cloth - water spots left to dry leave mineral deposits that sit between the paint and the vinyl.

Don't wax the van before the fitting. Fresh wax creates a barrier that affects adhesion. If you've recently waxed it, let us know and we'll make sure the decontamination process covers that.

Check the Bodywork and Flag Any Issues

Walk around the van and look at the panels honestly. Vinyl follows the surface beneath it - it doesn't hide dents, only covers them. A deep scratch will telegraph through the wrap film in many cases. A dent that's been hammered out badly will show as an irregular surface under the wrap.

None of this necessarily stops a wrap going on, but it's information we need to know before we start rather than on the day. If there's body damage, we can advise whether it'll affect the finish or not. If you need bodywork repaired before wrapping, knowing early gives you time to sort it without delaying the fitting.

Think About Where the Work Will Happen

We work at your location, but the conditions matter for the quality of the result. The ideal space is covered, reasonably clean and out of direct sun and wind. A garage or unit is best. A covered yard or loading bay works in decent conditions.

Vinyl becomes harder to apply accurately in cold weather - below around 10°C the material stiffens and conforming it to curves and recesses takes significantly more effort. In warm summer conditions, direct sunlight heats the panels and the film, making it harder to control. A shaded, covered space in moderate temperatures gives the best result.

If you don't have covered space at your Duston premises, let us know - we'll discuss options before the day rather than turning up and finding a problem with the environment.

Have Your Design Decisions Ready

The clearer you are on your design before we begin the production process, the faster everything moves. Think about:

  • What contact details need to be on the van - phone number, website, social media, or just a number. Keep it to what people can actually remember or note down quickly at a junction.
  • Whether you have brand guidelines - specific colours, a logo in a usable file format, font choices. If you have a logo, send it to us as a vector file (.ai, .eps or .svg) rather than a low-resolution image. A logo taken from a website jpeg will look fine on a business card and terrible on a van panel.
  • What you want the wrap to do - is it primarily about brand recognition on regular routes, or generating calls from people seeing the van parked on jobs? The answer affects how the design is structured.

What Not to Do Yourself - and Why

This section matters. A well-meaning attempt to prepare the van in the wrong way can create more work and affect the finished result.

Don't Remove Badges or Trim Yourself

Manufacturer badges and trim pieces sometimes need to come off so the vinyl can run cleanly under them and be wrapped around the edge rather than cut against it. But removing these incorrectly can snap plastic fixings, leave adhesive residue or in older vans pull paint with them. Leave them in place and let us assess on the day.

Don't Try to Repair the Existing Wrap Yourself

If your van has an existing wrap that's lifting or damaged, don't try to tack it back down with adhesive or tape before we arrive. This creates problems for removal and can contaminate the surface. Leave it as it is and let us assess it properly. We offer wrap removal as a separate service where needed.

Don't Apply Touch-Up Paint to Chips or Scratches Shortly Before Fitting

Fresh touch-up paint needs to cure fully before vinyl goes over it - this takes considerably longer than most people expect, often several weeks for a full cure. Touch-up paint applied the day before will not be ready. If there are chips or scratches you want addressed, do it at least a month before the fitting date, or leave it and let us advise on whether it'll affect the wrap result.

Don't Use Solvent-Based Cleaners on the Panels

Some tradespeople reach for panel wipe or solvent-based degreasers to clean the van down before we arrive. We understand the logic, but some solvent products leave a residue that affects vinyl adhesion. Leave the surface preparation to us - we use the right products in the right sequence.

On the Day Itself

Have the van available at the agreed time and location. If the van is a diesel that needs to warm up before you can move it, leave time for that so the panels aren't hot when we start. Remove any personal items from the cab that might need to be accessed while the cab doors are off limits during fitting.

A full wrap on a large panel van takes a full day in most cases, sometimes longer for complex designs or vans with significant curves and recesses. Plan your work day accordingly - don't book the van in for a job the same afternoon.

Book Your Full Van Wrap in Duston

Tell us your van make, model and year, what you're after on the design front, and where you're based in or around Duston. We'll work up a design proof and a clear price covering design, print and fitting. Call us to get the conversation started.

Why use us in Duston

  • Your design shown on your vehicle before printing.
  • Graphics designed and printed by us.
  • We fit at your premises in Duston.
  • We are insured.

Full Van Wraps in Duston?

Phone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.

Call Quote