Covering Northampton and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Van Wrapping in Duston - What to Do While You Wait (and What to Leave to Us)

If you have booked a van wrap near Duston and you are waiting for your installation date, there are a few things you can do to make the job go smoothly - and a few things that will make it go very badly if you do them beforehand.

5.0 from 9 Google reviews Est. 2020 Quoted in writing first Nothing printed until you sign off the proof Fitting arranged at your site

What Van Wrapping Involves

A van wrap applies precision-cut vinyl film to your vehicle's exterior panels. It carries your business branding - colours, logo, phone number, strapline - and protects the original paintwork underneath. We design and print everything in-house and come to your premises in Duston or wherever the van is kept. You do not need to arrange a drop-off or leave the vehicle with us overnight in most cases.

The process covers everything from the initial design brief through to the finished installation. If you are starting from scratch with no existing brand assets, we can build the design from your brief. If you already have logos and colour references, we work from those.

Before the Installation: What You Can Do to Help

The single most useful thing you can do in the days before your installation is to give the van a thorough clean, paying particular attention to door gaps, panel edges, wheel arches and around mirrors and handles. These are the areas where dirt, grease and old wax tend to accumulate, and they are exactly the areas where vinyl edges need to bond cleanly to the surface.

You do not need to do a professional preparation job - that is our responsibility on the day. But a visibly clean van saves time at the start and reduces the risk of contamination migrating to the panel surface during preparation. If the van has been used on a building site or is carrying a layer of mud and silicone dust, give it a proper wash a day or two before we arrive.

Also check the bodywork for anything we should know about:

  • Dents or creases in the panels - vinyl follows the contour of the surface and will show any significant body damage underneath. It does not hide it. If there is a dent you planned to get repaired, do that first
  • Recent bodywork repairs where filler or new paint has been applied - fresh filler should be fully cured before film is applied to it. New paint needs at least four to six weeks to fully outgas before vinyl goes on top, otherwise trapped solvents cause bubbling
  • Rust bubbles under existing paint - vinyl applied over a rust bubble will lift as the rust continues to spread beneath it
  • Existing signwriting, stickers or old vinyl that has not been removed - if you have old graphics on the van, let us know when you book so we can discuss whether removal is included or needs to be quoted separately. We handle wrap removal as part of our services

What Not to Do Before the Installation

This is where most preparation mistakes happen. The following actions in the days or weeks before your wrap installation can cause real problems:

  • Do not wax or polish the van. Wax and polish contain silicone, which creates a barrier that prevents the vinyl adhesive from bonding properly to the paint surface. Even a thorough solvent wipe-down may not remove it fully. If you have recently waxed the vehicle, tell us when you book so we can allow extra preparation time
  • Do not apply any touch-up paint or spray aerosol to panel surfaces. Aerosol touch-up paint is not fully compatible with the solvents used in vinyl adhesives and can cause adhesion failure over the repaired area
  • Do not use any tyre shine or gloss product near the lower panels. These products migrate onto adjacent surfaces and are extremely difficult to remove completely. Silicone contamination at the lower sills is a common cause of edge lifting on newly installed wraps
  • Do not attempt to remove any existing stickers or old vinyl yourself using a heat gun if you are not experienced with one. Incorrect heat application softens the paint surface and can lift it. If existing graphics need to come off, leave that to us

During the Installation: What to Expect

We will need reasonable access to the vehicle on all sides. If the van is parked against a wall or fence on one side, ask whether we can move it or whether the space is wide enough for us to work. Working in a tight space slows the job down and can affect the quality of the finished result on the obscured side.

Covered or indoor space is preferable for installation, particularly in cold weather. Cold surfaces cause vinyl to stiffen and become less pliable, which makes application to curves and complex panel shapes harder. If the van is kept in a garage, unit or covered yard, that is the ideal installation location. If not, a dry day with temperatures above about ten degrees is what we are aiming for.

Expect the installation to take a half day to a full day for most panel vans, depending on the complexity of the design and how much of the vehicle is being covered. A full wrap on a large van will take longer. We will give you a time estimate when we confirm the booking.

What Not to Do Yourself - During or After

Once installation is underway, the most useful thing you can do is stay out of the way and let us work. Do not apply heat, press down lifting sections mid-installation, or attempt to reposition any section of film that appears misaligned. Vinyl application involves precise positioning and tension management, and interference mid-process causes more problems than it solves.

After the wrap is complete, do not wash the vehicle for at least 48 hours. The adhesive needs time to cure fully. Do not park under trees, in areas with heavy bird activity or anywhere with spray or chemical overspray in that initial period.

If you notice anything after the job is finished that concerns you - a small lift at an edge, an area that does not look right - call us and describe it rather than attempting to fix it yourself. A small issue dealt with promptly is a minor repair. The same issue after someone has tried to press it down with a hot cloth is sometimes a panel replacement.

Get Your Duston Installation Booked

If you have a van in Duston or the surrounding area and want to know what a wrap will cost for your make, model and artwork requirements, call us with the basics and we will give you a straight answer on price and timing.

Why use us in Duston

  • Your design shown on your vehicle before printing.
  • Graphics designed and printed by us.
  • We fit at your premises in Duston.
  • We are insured.

Van Wrapping in Duston?

Phone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.

Call Quote