If you're waiting on a van graphics booking in Duston, there are useful things you can do to prepare your van - and a few things you should definitely not attempt yourself.
Van graphics apply vinyl film to your vehicle's exterior panels to display your business name, contact details, logo, brand colours and any imagery you want on the van. Options range from simple cut vinyl lettering through to full printed wraps covering every panel. Whatever level you go for, the finished result needs to bond cleanly to the panel surface and look right from a distance, which means the preparation and application conditions matter as much as the design itself.
We design and print in-house, then come to you to do the fitting at your premises or a convenient location in Duston or the surrounding area.
There's real value in preparing your van properly before the appointment. It speeds the job up, reduces the risk of any issues with adhesion, and means the fitter can get straight to the work rather than spending time on prep that you could have done yourself.
The panels that will carry graphics need to be clean before any film goes on. Road grime, traffic film and diesel exhaust deposits contain contaminants that prevent vinyl adhesive from bonding properly to the paint surface. A proper hand wash with a mild vehicle shampoo - not a drive-through brushed wash, which can leave wax and chemical residue - is the right preparation. Pay particular attention to the panel edges, door handles, door shuts and the fuel filler area, where build-up tends to be heaviest.
Once washed, dry the van fully with a clean cloth. Any residual water trapped under a graphic edge is a problem waiting to happen.
If your van has accessories bolted to the panels or roof that will sit on top of or immediately adjacent to where graphics will go, remove them before the appointment if you can do so safely. This gives the fitter clear access to the whole panel and means graphics can be positioned correctly without having to work around brackets or clamps. If fittings can't be removed, let the fitter know in advance so the design can be adjusted accordingly.
If you have a logo, make sure the file is accessible before the design stage. Vector files - AI, EPS or SVG format - are ideal because they scale to any size without losing quality. If you only have a JPG or PNG from your website, it may work for simple jobs but will show quality issues at van-panel scale. If you're not sure what files you have, we can advise you on whether they're suitable when you get in touch.
Before the design conversation, have a clear idea of what information needs to be on the van. Business name, phone number and website are the basics. Some trades add a tagline, a list of services or a local area description. Think about what a potential customer seeing the van for the first time needs to read in the two or three seconds they have before it's past them. Too much text at small sizes is harder to read at speed than a few key details in larger type.
There's a category of preparation that looks straightforward but causes real problems if it goes wrong. These are the tasks to leave alone until the fitter arrives.
It's tempting to give the panels a polish or wax before the appointment, thinking it'll make the finish look better. Don't. Wax, polish, silicone-based protectants and similar products leave a residue that actively prevents vinyl adhesive from bonding. Even a residue you can't see or feel will cause lifting within days or weeks of application. The fitter will degrease the surface as part of the installation process - that step is theirs to do, with the right products, immediately before the film goes on.
If your van has existing graphics that need to come off before the new ones go on, resist the urge to strip them yourself. Old vinyl - particularly film that has been on the vehicle for several years - bonds hard to the paint surface as the adhesive ages. Pulling it off quickly or using the wrong heat source risks lifting paint, particularly around any areas where the paint surface is already compromised by stone chips or age.
Adhesive residue left behind after amateur removal is another common problem. It's sticky, it attracts dirt, and it creates an uneven surface that new graphics won't bond to properly. We offer removal as part of our service and do it in a way that protects the paint underneath. If old graphics need to come off, include that in your enquiry from the start.
If a previous set of graphics has an edge that's started to lift and you're waiting for a professional to look at it, leave it alone. Using superglue, double-sided tape or even hairdryer heat to try to press it back down can make the eventual repair or removal significantly more complicated. The same goes for bubbles in existing film - poking or cutting them releases trapped air in a way that leaves a permanent mark and can let moisture in.
The best thing to do with a minor lift or bubble you've noticed is to press it gently back against the panel with a clean, flat hand and park the van out of direct sun until the fitter can look at it. That's usually enough to stabilise it short-term without making anything worse.
When we arrive at your premises in Duston, the first thing we do is a surface check on the panels that will carry graphics. We degrease the surface properly, check the panel condition and confirm the design before anything is cut or applied. If anything has changed since the design was agreed - a new phone number, a spelling correction - raise it at this point, not after the film is applied.
Depending on the size and complexity of the job, fitting time varies. We'll give you a realistic time estimate when we agree the booking.
Fresh graphics need a short settling period before the van goes back to heavy use. Avoid pressure washing the new graphics for at least 48 hours after fitting. Keep the van out of standing water if possible in the first day or two. The adhesive is still reaching its full bond strength in that period, and aggressive washing too soon can affect the edges before they've fully set.
After that, normal washing and care applies. Hand washing with a mild shampoo will keep the graphics looking good. Avoid anything abrasive or wax-based directly on the film.
If you're ready to get van graphics sorted for your business in Duston, call us and we'll talk through what you need, confirm the design approach and arrange to come to you. The sooner you get in touch, the sooner we can get your van working harder for your business.
Also available
We design, print and fit full or partial van wraps in Northampton, working at your premises so your vehicle never needs to leave your site.
See detailsWe wrap commercial vehicles of all types across Northampton, from small vans to large panel vans and specialist bodies.
See detailsWe design, print and fit branded wraps across entire vehicle fleets in Northampton, ensuring every vehicle in your fleet looks consistent.
See detailsPhone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.