If your van's signwriting is damaged, overdue for replacement or you've just booked a new application near Duston, knowing what to do in the meantime - and what to leave well alone - will save you problems on the day.
Van signwriting applies your business details to your vehicle using precision-cut or printed vinyl - your name, number, what you do, applied cleanly and legibly to the panels of your van. Every hour the van is on the road or parked in view of potential customers in Duston or beyond, it's working for your business. The return on a well-executed set of van graphics is straightforward: more calls from people who've seen the van, and an impression of a professional, established operation.
The process involves design, production and application. We handle design and printing in-house, then come to your location to apply the graphics - whether that's your yard, your driveway or a site where the van is based.
There's a reasonable amount a van owner can do ahead of the appointment to make the job go smoothly. Preparation matters because vinyl won't bond well to a dirty, greasy or contaminated surface - no matter how good the material or the applicator.
This is where things go wrong. With the best intentions, some van owners try to prepare or fix things themselves before the signwriter arrives, and end up creating problems that weren't there before. Here's what to leave alone:
Removing existing vinyl from a van looks straightforward and turns into a frustrating, time-consuming job very quickly. Heat guns set too high damage the paint. Fingernails, card scrapers and poorly chosen tools leave scratches. Adhesive remover solvents can lift or discolour surrounding paint if used incorrectly or left to dwell. We offer vinyl removal as part of our service. It costs less in the long run than having us repair paintwork that's been damaged in a DIY strip.
If there are chips or scrapes on a panel that's going to be lettered, the instinct is to touch them up first. That's sensible in principle, but only if the touch-up paint has had adequate time to cure fully - typically several weeks. Fresh touch-up paint is soft and can react with vinyl adhesive. If in doubt, tell us about the chips when you book and we'll advise whether it matters for the specific area being worked on.
Wax and polish create a surface barrier that prevents vinyl adhesive from bonding properly to the paint. If you've polished the van recently, the applicator will need to remove that layer before applying graphics. Avoid applying any wax or polish in the week before the appointment.
If existing graphics are peeling, the temptation is to glue them back down with whatever's to hand. This almost always makes the problem worse - wrong adhesives, wrong application temperature, or simply trapping moisture and grime under the lifted section. Leave it and let us assess it when we arrive.
Beyond the van itself, there are practical decisions to make while you're waiting for the appointment. Use the time to:
We come to you, so the van stays where it is. Plan for the work to take a few hours depending on the size of the job - a full van with graphics on both sides, the rear and the cab doors will take longer than a simple cab door and tailgate job. The van should ideally be in shade or at least out of direct strong sunlight during application, as very high surface temperatures affect how the vinyl applies. If you're in Duston and parking in a shaded area isn't easy, early morning or late afternoon appointments can help on hot days.
Avoid pressure washing for the first 48 to 72 hours. The adhesive is still curing and high-pressure water at the edges can undermine the bond before it's fully set. Normal driving is fine. If you notice any small bubbles, leave them - most will settle within a few days. If a larger bubble persists or an edge starts to lift in that early period, call us rather than trying to press it back down yourself.
Call us and tell us what you need - the size of the van, whether you have existing graphics to remove, and whether you've got a logo ready or need one designed. We'll talk you through the design options and arrange to come to you at a time that suits your schedule.
Also available
We design, print and fit full or partial van wraps in Northampton, working at your premises so your vehicle never needs to leave your site.
See detailsWe wrap commercial vehicles of all types across Northampton, from small vans to large panel vans and specialist bodies.
See detailsWe design, print and fit branded wraps across entire vehicle fleets in Northampton, ensuring every vehicle in your fleet looks consistent.
See detailsPhone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.