Covering Northampton and the surrounding area Monday to Friday 9:00am - 5:00pm Get a quote

Vehicle Graphics in Duston - What to Do While You Wait (and What to Leave Alone)

If your vehicle graphics in Duston have been damaged or you are waiting for a new fitting, there are sensible steps to take now - and a few things that will only make the job harder later.

5.0 from 9 Google reviews Est. 2020 Quoted in writing first Nothing printed until you sign off the proof Fitting arranged at your site

What Vehicle Graphics Involves

Vehicle graphics covers printed panels, cut vinyl lettering, partial wraps and full wraps fitted to cars, vans, lorries, trailers and fleet vehicles. We design and print in-house, come to your location in Duston and fit on-site, so your vehicle does not need to leave your yard or premises. We also remove existing graphics when vehicles are being rebranded or sold.

Sometimes there is a gap between noticing a problem or deciding you want new graphics, and actually getting the work done. What you do - and what you do not do - in that window affects the final result and the cost.

When Something Has Gone Wrong With Existing Graphics

Lifting edges, bubbles under panels, faded print and cracked film are the most common problems that bring people to us. Each one has a cause, and understanding the cause helps you manage the situation sensibly while you wait for us to attend.

Lifting edges usually start at points of tension - around door handles, mirrors, bottom edges of panels and anywhere the film goes around a curve or recess. The adhesive bond breaks down first where the film is under the most stress. Once lifting starts, it tends to spread if left.

Bubbles develop when air or moisture is trapped under the film. Some small bubbles on a recently fitted graphic settle out as the adhesive cures. Bubbles that appear on a graphic that has been in place for some time indicate that the bond has broken locally - those will not resolve on their own.

What You Can Do Right Now

These steps are practical, safe and will not make the job harder when we arrive:

  • Keep the vehicle clean. Dirt, road salt and grime sitting on the surface - especially at lifting edges - work their way underneath and compromise the adhesive further. A gentle hand wash with mild shampoo keeps the situation from worsening.
  • Keep the vehicle dry where possible. If a panel edge is lifting, prolonged soaking in rain or through a wash bay accelerates the spread. Park under cover if you have it.
  • Photograph the damage clearly. Good photographs of the problem area, taken in daylight, give us useful information before we arrive and help us come prepared with the right materials.
  • Note where and when the problem started. If you can tell us that a corner started lifting three weeks ago and has spread by a few centimetres, that is more useful than a general description of the damage. It helps us assess whether repair or replacement is the right approach.
  • Wipe off fuel splashes, bird droppings and tree sap promptly. These will degrade a printed graphic surface if left in contact. A damp cloth is enough for fresh deposits.

What Not to Do Yourself

This is where most self-help attempts cause more damage than the original problem. These are common mistakes - and each one makes the eventual repair harder or more expensive:

  • Do not try to re-stick a lifting edge with tape or household adhesive. General-purpose adhesives and tape residues contaminate the surface. When we come to repair or replace the section, the adhesive has to be cleaned off fully first, which adds time and can damage the surface underneath. Tape also holds dirt against the film and accelerates fading and degradation at that point.
  • Do not try to press a bubble flat with heat from a hair dryer or heat gun unless you have experience with vinyl. Too much heat distorts the film permanently. Too little does nothing. Without the right tool and technique, you are likely to stretch the material so it no longer sits flat even when re-adhered.
  • Do not try to peel off a large section of old or damaged graphic yourself. Cold-pulling vinyl off at the wrong angle lifts paintwork, particularly on older vehicles. If a large area needs to come off, leave it to a specialist who has the right heat tools to do it cleanly.
  • Do not apply any polish, wax or compound to the damaged area. These products leave a residue that prevents new adhesive from bonding properly. Even a light application of polish to a panel edge before repair means that edge needs to be degreased fully before anything new will stick to it.
  • Do not park the vehicle so that a lifting panel edge is in direct, sustained sun for long periods. Heat causes the lifted edge to curl further and can shrink the film slightly, making it shorter than the gap it needs to cover if re-adhered.

If You Are Waiting for New Graphics to Be Fitted

If you have agreed a new graphics job and are waiting for the appointment, there are a few things that make the fitting go more smoothly:

  • Make sure the vehicle surface is clean before we arrive. We will degrease before fitting, but arriving with a heavily soiled vehicle means more preparation time.
  • If the vehicle has existing graphics that are being replaced, do not attempt to remove them yourself in advance. Leave them for us to remove properly with the right heat and technique. Rushed self-removal almost always leaves adhesive residue and sometimes damages the paint, both of which add preparation time.
  • Check that you have confirmed the exact vehicle with us - the registration, make and model. Vehicle dimensions vary more than people expect between model years and body types, and we prepare the artwork for the specific vehicle.
  • Make the vehicle available in a covered or sheltered area if possible. Cold and wet conditions make fitting harder and slow the initial cure. Fitting indoors or under cover is always preferable to working in a cold yard in winter.

For Fleet Managers: Managing the Gap Across Multiple Vehicles

If you are waiting for a graphics refresh across a small fleet, the same rules apply to each vehicle. The practical addition is to triage which vehicles are most customer-facing and prioritise those for first fitting. A van in poor graphic condition making client visits does more brand damage than one that sits in a yard most of the week.

Keep a simple list of each vehicle, its current graphic condition and when it was last fitted. That takes ten minutes and means you can brief us accurately when we attend rather than us having to assess each vehicle from scratch on the day.

Getting the Job Booked in Duston

We come to you in Duston and fit at your premises. To get a price and arrange a time, call us with the vehicle type, the coverage you need and an idea of what you want the finished result to look like. If you have a logo or existing artwork, tell us what format it is in and we will advise on whether it is suitable for print at vehicle scale.

The more information you give us upfront, the more accurate the quote and the less back-and-forth before we can book a date.

Why use us in Duston

  • Your design shown on your vehicle before printing.
  • Graphics designed and printed by us.
  • We fit at your premises in Duston.
  • We are insured.

Vehicle Graphics in Duston?

Phone us or fill in the form. A few details about the vehicles are enough for us to start on a written quote.

Call Quote